FitMatch

The STIHL MS 212 takes the STIHL 63 PM3 saw chain 3636 000 0055 (55 drive links, 40 cm bar) as its chain; Australian sellers list it from A$40.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

STIHL MS 212

Your chainsaw

Chainsaw

Confirmed against STIHL's list

3636 000 0055

Takes the 3636 000 0055

Chain · check the code on your old part.

STIHL Australia sells the MS 212 with a 40 cm Light 04 bar and 63 PM3 chain: 55 drive links. STIHL also lists a 45 cm bar (61 drive links), a 63 PM3 loop STIHL Australia does not sell.

Other STIHL chainsaws that take the 3636 000 0055

Genuine

$40.00

STIHL Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by STIHL. Compatible: another brand.

Lowest price · $40.00

STIHL Australia. Every seller we track is listed below. Some links earn us a commission.

Open STIHL Australia

Other parts this chainsaw takes

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $40.00

Opens STIHL Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it once any cutter's service marks are no longer visible, STIHL says; check the chain before work and sharpen it when it is blunt.

After replacing: No reset needed. Check the chain tension often while a new chain beds in.

How to change the chain in your STIHL MS 212

Watch the guide or follow the steps.

How To Replace Your STIHL Chainsaw Chain | Chainsaw Maintenance | STIHL Chainsaw | STIHL GB · STIHL GB (official)
  1. 1Stop the engine and engage the chain brake. On a battery saw, take the battery out; on an electric saw, unplug it. Put on sturdy work gloves: the cutters are sharp.
  2. 2Undo the nut and take off the chain sprocket cover. On models with the quick chain tensioner (C-B, C-BE), open the wing-nut handle and undo the wing nut instead.
  3. 3Slacken the chain (turn the tensioning screw anticlockwise, or the tensioning gear clockwise on quick-tensioner models), then lift off the guide bar and the old chain.
  4. 4Fit the new chain in the bar groove so the arrows on the tie straps on top of the bar point in the direction of rotation, and seat the drive links on the chain sprocket.
  5. 5Put the bar back on with the tensioner peg in the hole in the bar, then turn the tensioning screw clockwise (the tensioning gear anticlockwise on quick-tensioner models) until the chain fits snugly against the bar and the drive links sit in the groove.
  6. 6Refit the chain sprocket cover flush with the saw and tighten the nut firmly (close the wing-nut handle on quick-tensioner models). STIHL says the chain expands and contracts as you cut, so check the tension regularly.
Every number this part goes by
Retail name:
3636 000 0055
Retail name:
3636-000-0055
Retail name:
36360000055
Retail name:
63 PM3 55
Retail name:
63PM3 55

Sellers list any of these; they are the same part.

About your MS 212

STIHL chainsaw — Petrol chainsaws (home). Its chain is the 63 PM3 saw chain 3636 000 0055 (55 drive links, 40 cm bar), part 3636 000 0055.

Other chains the maker lists for this chainsaw:

Also in this chainsaw:

Where the model number is: The model is on the rating plate on the saw's housing (STIHL MS 170, Husqvarna 135 Mark II, Ryobi OCS1830BL). The chain's code is stamped on the drive links or printed on its box, and the bar length is on the bar.

Fits these 3 STIHL models

STIHL3 models

MS 182. STIHL Australia sells the MS 182 with a 40 cm Light 04 bar and 63 PM3 chain: 55 drive links. STIHL also lists a 45 cm bar (61 drive links), a 63 PM3 loop STIHL Australia does not sell.

MS 212. STIHL Australia sells the MS 212 with a 40 cm Light 04 bar and 63 PM3 chain: 55 drive links. STIHL also lists a 45 cm bar (61 drive links), a 63 PM3 loop STIHL Australia does not sell.

MS 231. With a 40 cm (16") 3/8" P bar: 63 PM3, 55 drive links.

Common questions
Which chain fits the STIHL MS 212?
The STIHL MS 212 takes the STIHL 63 PM3 saw chain 3636 000 0055 (55 drive links, 40 cm bar). STIHL Australia sells the MS 212 with a 40 cm Light 04 bar and 63 PM3 chain: 55 drive links. STIHL also lists a 45 cm bar (61 drive links), a 63 PM3 loop STIHL Australia does not sell.
Where can I buy the 3636 000 0055 in Australia?
We track 1 Australian seller for the 3636 000 0055; the lowest listed price when we last checked was A$40.00 at STIHL Australia. Prices are re-checked daily and dated on this page.
How do I fit the 3636 000 0055 in a STIHL MS 212?
6 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A blunt or stretched chain cuts slowly, throws dust instead of chips, and makes the saw harder to control.
Is there anything to reset afterwards?
No reset needed. Check the chain tension often while a new chain beds in.

Something looks wrong with the MS 212 match? . Reports go to a person, not a bot.