The STIHL MSA 300 C-O takes the STIHL 23 RS Pro saw chain 3690 000 0067 (67 drive links, 40 cm bar) as its chain; Australian sellers list it from A$48.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your chainsaw
STIHL MSA 300 C-O
Chainsaw
Confirmed against STIHL's listConfirmed against STIHL's own compatibility list
Not yours? Change
Takes the 3690 000 0067 chain
23 RS Pro saw chain 3690 000 0067 (67 drive links, 40 cm bar) · check the code on your old part before ordering.
STIHL Australia sells the MSA 300 C-O with a 40, 45 or 50 cm Light 04 bar (.325", 1.3 mm): 67, 74 or 81 drive links.
Your chainsaw
Chainsaw
Confirmed against STIHL's listConfirmed against STIHL's own compatibility list
Takes the 3690 000 0067
Chain · check the code on your old part.
STIHL Australia sells the MSA 300 C-O with a 40, 45 or 50 cm Light 04 bar (.325", 1.3 mm): 67, 74 or 81 drive links.
Other STIHL chainsaws that take the 3690 000 0067
GenuineGenuine STIHL
$48.00
STIHL Australia · 28 OctLowest genuine · STIHL Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by STIHL. Compatible: another brand.Genuine is made by STIHL. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $48.00
STIHL Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens STIHL Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it once any cutter's service marks are no longer visible, STIHL says; check the chain before work and sharpen it when it is blunt.
After replacing: No reset needed. Check the chain tension often while a new chain beds in.
How to change the chain in your STIHL MSA 300 C-O
Watch the guide or follow the steps.
- 1Stop the engine and engage the chain brake. On a battery saw, take the battery out; on an electric saw, unplug it. Put on sturdy work gloves: the cutters are sharp.
- 2Undo the nut and take off the chain sprocket cover. On models with the quick chain tensioner (C-B, C-BE), open the wing-nut handle and undo the wing nut instead.
- 3Slacken the chain (turn the tensioning screw anticlockwise, or the tensioning gear clockwise on quick-tensioner models), then lift off the guide bar and the old chain.
- 4Fit the new chain in the bar groove so the arrows on the tie straps on top of the bar point in the direction of rotation, and seat the drive links on the chain sprocket.
- 5Put the bar back on with the tensioner peg in the hole in the bar, then turn the tensioning screw clockwise (the tensioning gear anticlockwise on quick-tensioner models) until the chain fits snugly against the bar and the drive links sit in the groove.
- 6Refit the chain sprocket cover flush with the saw and tighten the nut firmly (close the wing-nut handle on quick-tensioner models). STIHL says the chain expands and contracts as you cut, so check the tension regularly.
Every number this part goes by
- Retail name:
- 23 RS Pro 67
- Retail name:
- 23RSPro 67
- Retail name:
- 3690 000 0067
- Retail name:
- 3690-000-0067
- Retail name:
- 36900000067
Sellers list any of these; they are the same part.
About your STIHL MSA 300 C-O
STIHL chainsaw — Battery chainsaws (AP system). Its chain is the 23 RS Pro saw chain 3690 000 0067 (67 drive links, 40 cm bar), part 3690 000 0067.
Other chains the maker lists for this chainsaw:
- STIHL 23 RS Pro saw chain 3690 000 0074 (74 drive links, 45 cm bar). With a 45 cm (18") bar: 74 drive links.
- STIHL 23 RS Pro saw chain 3690 000 0081 (81 drive links, 50 cm bar). With a 50 cm (20") bar: 81 drive links.
Where the model number is: The model is on the rating plate on the saw's housing (STIHL MS 170, Husqvarna 135 Mark II, Ryobi OCS1830BL). The chain's code is stamped on the drive links or printed on its box, and the bar length is on the bar.
Fits these 2 STIHL models
STIHL2 models
MS 261 C-M. STIHL Australia sells the MS 261 C-M with a 40 cm Light 04 bar and 23 RS Pro chain: 67 drive links. STIHL lists 74 for a 45 cm and 81 for a 50 cm bar.
MSA 300 C-O. STIHL Australia sells the MSA 300 C-O with a 40, 45 or 50 cm Light 04 bar (.325", 1.3 mm): 67, 74 or 81 drive links.
Common questions
- Which chain fits the STIHL MSA 300 C-O?
- The STIHL MSA 300 C-O takes the STIHL 23 RS Pro saw chain 3690 000 0067 (67 drive links, 40 cm bar). STIHL Australia sells the MSA 300 C-O with a 40, 45 or 50 cm Light 04 bar (.325", 1.3 mm): 67, 74 or 81 drive links.
- Where can I buy the 3690 000 0067 in Australia?
- We track 1 Australian seller for the 3690 000 0067; the lowest listed price when we last checked was A$48.00 at STIHL Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 3690 000 0067 in a STIHL MSA 300 C-O?
- 6 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A blunt or stretched chain cuts slowly, throws dust instead of chips, and makes the saw harder to control.
- Is there anything to reset afterwards?
- No reset needed. Check the chain tension often while a new chain beds in.
Something looks wrong with the MSA 300 C-O match? . Reports go to a person, not a bot.