BRITA filtered water tap filters by part number
2 BRITA filters sold in Australia. Each part page lists the models it fits, how often to change it and what sellers charge.
The filters
A 1000 under-sink filter cartridgeA1000 · 3 modelsfrom $96.20The BRITA A 1000 is the cartridge for the BRITA mypure A1c under-sink kit, and BRITA Australia says it also fits BRITA filter taps. It clips into a filter head on a wall bracket in the cupboard. BRITA says to replace it six months after first use at the latest; the battery timer that comes with the kit beeps when it is due.
Change it every 6 months; 5 steps, no tools.
After the change: Press DISPLAY briefly, then hold START/RESET for 5 seconds until a long beep; the 180-day timer restarts.
Fits 3 BRITA models: mypure A1c, WD3030, WD3040.
ON TAP V-MF replacement water filter1052402 · 1 modelfrom $24.95This is the replacement filter for the BRITA ON TAP Pro V-MF, the filter that clips onto your kitchen tap. BRITA says each filter does up to 600 litres, about four months. To change it you unscrew the cap, take the old filter out and push the new one in.
Change it every 4 months; 5 steps, no tools.
After the change: After fitting the new filter, press and hold the Reset button for 3 seconds to reset the filter counter.
Fits the ON TAP Pro V-MF.
Brand names describe compatibility only; FitMatch is independent of BRITA. Fitment sources are recorded on every model page.