The BRITA mypure A1c takes the BRITA A 1000 under-sink filter cartridge as its water filter; replace it every 6 months; Australian sellers list it from A$96.20 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your filtered water tap
BRITA mypure A1c
Tap or under-sink system
Confirmed against BRITA's listConfirmed against BRITA's own compatibility list
Not yours? ChangeSave it · remind me every 6 months
Takes the A1000 water filter
A 1000 under-sink filter cartridge · replace every 6 months · check the code printed on your old filter before ordering.
Your filtered water tap
Tap or under-sink system
Confirmed against BRITA's listConfirmed against BRITA's own compatibility list
Takes the A1000
Water filter · every 6 months · check the code on your old filter.
Other BRITA filtered water taps that take the A1000
GenuineGenuine BRITA
$96.20
Amazon AU · 26 OctLowest genuine · Amazon AU · checked 26 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by BRITA. Compatible: another brand. Check certification on the seller's page.Genuine is made by BRITA. Compatible is made by another brand. Check the seller's certification details before choosing.
Lowest price · $96.20
Amazon AU. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 3 sellers
AUD, before delivery. Each price shows when it was checked.
Genuine BRITA
3 sellers
Opens Amazon AU in a new tab. Their page is the source of truth for price, delivery and returns.
Not due yet?
Get a nudge when your water filter is due — it's every 6 months. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the water filter in your BRITA mypure A1c
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Put a container under the flush hose and open the locking handle on the filter head; this shuts off the water to the cartridge.
- 2Press the flush valve to let the pressure out of the system.
- 3Take the old cartridge out of the filter head. The cartridge pivots 90 degrees in the wall bracket to make this easier.
- 4Fit the new A 1000 into the head and close the locking handle.
- 5Run the filtered tap until the water is clear and free of bubbles (at least 1 litre), then reset the timer: press DISPLAY, then hold START/RESET for 5 seconds.
Every number this part goes by
- Retail name:
- 1004260
- Retail name:
- A1000
Sellers list any of these; they are the same part.
About your BRITA mypure A1c
BRITA filtered water tap, tap or under-sink system — BRITA under-sink filter. Its water filter is the A 1000 under-sink filter cartridge, part A1000, changed every 6 months.
Where the model number is: On a boiling or chilled water tap the model is on the label on the unit under the bench, not on the tap itself. On an under-sink system it is on the filter head or housing; the cartridge code is printed on the old cartridge.
Fits these 3 BRITA models
BRITA3 models
Common questions
- Which water filter fits the BRITA mypure A1c?
- The BRITA mypure A1c takes the BRITA A 1000 under-sink filter cartridge.
- How often should I replace the water filter in my BRITA mypure A1c?
- Every 6 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
- Where can I buy the A1000 in Australia?
- We track 3 Australian sellers for the A1000; the lowest listed price when we last checked was A$96.20 at Amazon AU. Prices are re-checked daily and dated on this page.
- How do I fit the A1000 in a BRITA mypure A1c?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- The carbon stops reducing chlorine taste and odour and the flow from the tap slows as the cartridge clogs; a boiling-water tap with a scale-reducing filter builds scale in its tank faster.
- How do I reset the reminder?
- Press DISPLAY briefly, then hold START/RESET for 5 seconds until a long beep; the 180-day timer restarts.
Something looks wrong with the mypure A1c match? . Reports go to a person, not a bot.