How often should I change a Peppy Taps filter?

Every 12 months for the 2CB5-S filter cartridge (Everpure EV9617-22), the most common Peppy Taps water filter here. Each model page shows the interval for its own water filter.

What happens if I don't change the water filter?

The carbon stops reducing chlorine taste and odour and the flow from the tap slows as the cartridge clogs; a boiling-water tap with a scale-reducing filter builds scale in its tank faster.

Does Peppy Taps make a compatible filter?

Everpure makes the genuine filter for Peppy Taps models. Compatible filters for Peppy Taps models are made by other companies to the same shape and flow rate, and Australian sellers we track list both; each part page shows the genuine and compatible prices side by side and the certifications we could confirm.

Peppy Taps replacement filters

Which replacement filter each of the 5 Peppy Taps water taps and under-sink systems sold in Australia takes, with dated prices from 3 Australian sellers, genuine and compatible side by side.

Most take the EV9617-22 (5 of 5 models), from $59.95. Check yours below.

Compatible · eBay AU$59.95 Genuine · eBay AU$74.00 All 3 sellers

Showing 5 of 5 Peppy Taps models · grouped by filter platform

2CB5-S filter cartridge (Everpure EV9617-22)takes EV9617-22

How to change your Peppy Taps filter

Steps for the 2CB5-S filter cartridge (Everpure EV9617-22) (EV9617-22), the water filter 5 Peppy Taps models take. Change it every 12 months.

No clear video for this water filter yet. The steps cover it.

1Switch off the boiler (and the chiller if you have one), then turn off the cold mains stopcock under the sink. Put a towel under the filter.
2Twist off the old cartridge; a little water may come out. If yours is Peppy's old white filter, the new silver and black bracket must be fitted first.
3Push the new 2CB5-S up into the mounting bracket slightly and twist it on securely.
4Turn the water back on and run filtered chilled or ambient water for 5 minutes. On a Signature (electronic) tap, run two cycles of the blue sensor.
5Hold the bottom temperature sensor on the boiler until it beeps (about 5 seconds) to clear the filter symbol, then switch the boiler and chiller back on.

Reset the filter light

Hold the bottom temperature sensor on the boiler until it beeps (about 5 seconds) to stop the filter symbol flashing. To restart the boiler's filter timer, switch the boiler off with the top sensor, hold the bottom sensor 4–5 seconds, then switch it back on.

Get a reminder when your Peppy Taps filter is due

Most Peppy Taps models here change it every 12 months. One email two weeks before, no newsletter. Type the model from the sticker and we set the date for that model.

Common questions

How often should I change a Peppy Taps filter?: Every 12 months for the 2CB5-S filter cartridge (Everpure EV9617-22), the most common Peppy Taps water filter here. Each model page shows the interval for its own water filter.
What happens if I don't change the water filter?: The carbon stops reducing chlorine taste and odour and the flow from the tap slows as the cartridge clogs; a boiling-water tap with a scale-reducing filter builds scale in its tank faster.
Does Peppy Taps make a compatible filter?: Everpure makes the genuine filter for Peppy Taps models. Compatible filters for Peppy Taps models are made by other companies to the same shape and flow rate, and Australian sellers we track list both; each part page shows the genuine and compatible prices side by side and the certifications we could confirm.
How do I reset the filter light on a Peppy Taps tap or under-sink system?: Hold the bottom temperature sensor on the boiler until it beeps (about 5 seconds) to stop the filter symbol flashing. To restart the boiler's filter timer, switch the boiler off with the top sensor, hold the bottom sensor 4–5 seconds, then switch it back on.

All 5 Peppy Taps we list, A to Z

Brand names describe compatibility only; FitMatch is independent of Peppy Taps. Fitment sources are recorded on every model page.