The Peppy Taps Flagship Pull Out 4 in 1 takes the Peppy Taps 2CB5-S filter cartridge (Everpure EV9617-22) as its water filter; replace it every 12 months; Australian sellers list it from A$59.95 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your filtered water tap
Peppy Taps Flagship Pull Out 4 in 1
Tap or under-sink system
Confirmed against Peppy Taps's listConfirmed against Peppy Taps's own compatibility list
Not yours? ChangeSave it · remind me every 12 months
Takes the EV9617-22 water filter
Peppy Taps 2CB5-S filter cartridge (Everpure EV9617-22) · replace every 12 months · check the code printed on your old filter before ordering.
Systems sold before early 2025 came with Peppy's original white filter, which is discontinued. Changing to the 2CB5-S needs Peppy's new silver and black mounting bracket the first time.
Your filtered water tap
Tap or under-sink system
Confirmed against Peppy Taps's listConfirmed against Peppy Taps's own compatibility list
Takes the EV9617-22
Water filter · every 12 months · check the code on your old filter.
Systems sold before early 2025 came with Peppy's original white filter, which is discontinued. Changing to the 2CB5-S needs Peppy's new silver and black mounting bracket the first time.
Other Peppy Taps that take the EV9617-22
GenuineGenuine Everpure
$74.00
eBay AU · 26 OctLowest genuine · eBay AU · checked 26 Oct
CompatibleCompatible option
$59.95
eBay AU · 26 OcteBay AU · checked 26 Oct
Check sellerCheck seller details
Genuine: made by Everpure. Compatible: another brand. Check certification on the seller's page.Genuine is made by Everpure. Compatible is made by another brand. Check the seller's certification details before choosing.
Lowest compatibleLowest compatible price · $59.95
eBay AU. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 5 listings from 3 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
2 listings from 1 seller
Opens eBay AU in a new tab. Their page is the source of truth for price, delivery and returns.
Not due yet?
Get a nudge when your water filter is due — it's every 12 months. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the water filter in your Peppy Taps Flagship Pull Out 4 in 1
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Switch off the boiler (and the chiller if you have one), then turn off the cold mains stopcock under the sink. Put a towel under the filter.
- 2Twist off the old cartridge; a little water may come out. If yours is Peppy's old white filter, the new silver and black bracket must be fitted first.
- 3Push the new 2CB5-S up into the mounting bracket slightly and twist it on securely.
- 4Turn the water back on and run filtered chilled or ambient water for 5 minutes. On a Signature (electronic) tap, run two cycles of the blue sensor.
- 5Hold the bottom temperature sensor on the boiler until it beeps (about 5 seconds) to clear the filter symbol, then switch the boiler and chiller back on.
Every number this part goes by
- Retail name:
- 2CB5-S
- Retail name:
- 2CB5S
- Retail name:
- EV9617-22
- Retail name:
- EV961722
- Retail name:
- FILT-2CB5S
- Retail name:
- PEPPYEV961722
Sellers list any of these; they are the same part.
About your Peppy Taps Flagship Pull Out 4 in 1
Peppy Taps, tap or under-sink system — Peppy Taps Flagship. Its water filter is the Peppy Taps 2CB5-S filter cartridge (Everpure EV9617-22), part EV9617-22, changed every 12 months.
Where the model number is: On a boiling or chilled water tap the model is on the label on the unit under the bench, not on the tap itself. On an under-sink system it is on the filter head or housing; the cartridge code is printed on the old cartridge.
Fits these 5 Peppy Taps models
Peppy Taps5 models
Systems sold before early 2025 came with Peppy's original white filter, which is discontinued. Changing to the 2CB5-S needs Peppy's new silver and black mounting bracket the first time.
Common questions
- Which water filter fits the Peppy Taps Flagship Pull Out 4 in 1?
- The Peppy Taps Flagship Pull Out 4 in 1 takes the Peppy Taps 2CB5-S filter cartridge (Everpure EV9617-22). Systems sold before early 2025 came with Peppy's original white filter, which is discontinued. Changing to the 2CB5-S needs Peppy's new silver and black mounting bracket the first time. Compatible filters made to the same specification also fit.
- How often should I replace the water filter in my Peppy Taps Flagship Pull Out 4 in 1?
- Every 12 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
- Where can I buy the EV9617-22 in Australia?
- We track 3 Australian sellers for the EV9617-22; the lowest listed price when we last checked was A$59.95 at eBay AU. Prices are re-checked daily and dated on this page.
- How do I fit the EV9617-22 in a Peppy Taps Flagship Pull Out 4 in 1?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- The carbon stops reducing chlorine taste and odour and the flow from the tap slows as the cartridge clogs; a boiling-water tap with a scale-reducing filter builds scale in its tank faster.
- How do I reset the reminder?
- Hold the bottom temperature sensor on the boiler until it beeps (about 5 seconds) to stop the filter symbol flashing. To restart the boiler's filter timer, switch the boiler off with the top sensor, hold the bottom sensor 4–5 seconds, then switch it back on.
Something looks wrong with the Flagship Pull Out 4 in 1 match? . Reports go to a person, not a bot.