Clothes dryer foam filter
Electrolux / AEG heat pump base filter, small 1366349015
1366349015
Fits 4 models
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Electrolux
$39.99
AEG Australia · 26 OctLowest genuine · AEG Australia · checked 26 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Electrolux. Compatible: another brand.Genuine is made by Electrolux. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $39.99
AEG Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Opens AEG Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is torn or no longer seals; rinse it when the dryer shows the filter warning.
After replacing: No reset needed. The clean-filter notification clears after you clean the filter and start the next programme.
How to change the 1366349015 dryer foam filter
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1When the heat exchanger filter light is on (with full loads, about every 3 cycles), open the loading door, move the release button at the bottom of the door opening and open the heat exchanger door.
- 2Turn the lever to unlock the cover, lower the filter cover, lift the door filter, then pull the heat exchanger filter out of the bottom compartment.
- 3Push the hook to open the heat exchanger filter and clean it with a moist hand, or with warm water and a scrubbing brush. Close it.
- 4Take out the small filter in the base and clean it the same way. Every 6 months, vacuum the fluff out of the heat exchanger compartment.
- 5Refit the small filter and the heat exchanger filter, close the cover, lock the lever until it snaps, close the doors and refit the door filter.
Every number this part goes by
- Retail name:
- 1366349015
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits these 4 models
Electrolux2 models
Common questions
- What does the 1366349015 fit?
- The Electrolux / AEG heat pump base filter, small 1366349015 fits 4 models, including the AEG T96690IH, AEG T97689IH and Electrolux EDH3284PDW. Every one is listed on this page.
- Where can I buy the 1366349015 in Australia?
- We track 2 Australian sellers for the 1366349015; the lowest listed price when we last checked was A$39.99 at AEG Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 1366349015?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Lint gets past a torn filter into the condenser or heat pump, airflow drops and each load takes longer to dry.
- Is there anything to reset afterwards?
- No reset needed. The clean-filter notification clears after you clean the filter and start the next programme.
Something looks wrong with the 1366349015 match? . Reports go to a person, not a bot.