Electrolux dryer filters by part number

8588074539012 is the white fluff filter assembly for older Electrolux, Westinghouse and AEG heat pump dryers such as EDH903BEWA, WDH804N8WA and T8DHC846C. It sits in the door opening. Clean it after each cycle and replace it when damaged.

After the change: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Fits 5 Electrolux models: EDH803BEWA, EDH803R7WB, EDH803R9WB, EDH903BEWA, EDH903R7WB.

1254242306 is the air-intake lint filter Electrolux lists for its older condenser dryers (EDC47130W, EDC66150W, EDC510E, EDI96150W). Clean it after each cycle and replace it when damaged.

After the change: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Fits 4 Electrolux models: EDC47130W, EDC510E, EDC66150W, EDI96150W.

140075066062 is the fluff filter for Electrolux UltimateCare 700 and 900 heat pump dryers (EDH803R7WC, EDH902R9SC, EDH903R7SC, EDH903R7WC). Some builds take 140075066070. Clean it after each cycle and replace it when damaged.

After the change: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Fits 4 Electrolux models: EDH803R7WC, EDH902R9SC, EDH903R7SC, EDH903R7WC.

8588074539053 is the grey fluff filter assembly for Electrolux UltimateCare and Westinghouse heat pump dryers. It sits in the door opening and catches lint on every load. Clean it after each cycle and replace it if the mesh tears or the frame no longer seals.

After the change: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Fits 4 Electrolux models: EDH803P5WC, EDH803R7WB, EDH803R9WB, EDH804U5WB.

1254242504 is the air-intake lint filter Electrolux lists for its older condenser dryers (EDC47130W, EDC66150W, EDC78550W, EDI97170W). On the EDI97170W it works together with the felt door filter; both are cleaned after every cycle. Replace it when damaged.

After the change: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Fits 4 Electrolux models: EDC47130W, EDC66150W, EDC78550W, EDI97170W.

140075066070 is the second version of the fluff filter for Electrolux UltimateCare 700 and 900 heat pump dryers; the maker lists it for the same models as 140075066062, by production number. Clean it after each cycle and replace it when damaged.

After the change: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Fits 4 Electrolux models: EDH803R7WC, EDH902R9SC, EDH903R7SC, EDH903R7WC.

140176012023 is the lint filter for the Electrolux UltimateCare EDV605H3WC, EDV705H3WC and EDV705N3SC and the Westinghouse WDV457H3WB vented dryers. It sits at the bottom of the door opening. Clean it after every load; Electrolux says a torn or damaged lint filter must be replaced straight away.

After the change: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Fits 3 Electrolux models: EDV605H3WC, EDV705H3WC, EDV705N3SC.

1366349015 is the small base (basement) filter for the Electrolux EDH3284PDW and EDH3786GDW and AEG T96690IH and T97689IH heat pump dryers. It sits behind the plinth door at the bottom. Rinse it when it looks clogged and replace it when torn.

After the change: No reset needed. The clean-filter notification clears after you clean the filter and start the next programme.

Fits 2 Electrolux models: EDH3284PDW, EDH3786GDW.

140200821027 is a fluff filter assembly for the Electrolux EDH812R7WC and EDH912R9WC and AEG T959V6PRC heat pump dryers. Some builds take 140200821084 instead. Clean it after each cycle and replace it when damaged.

After the change: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Fits 2 Electrolux models: EDH812R7WC, EDH912R9WC.

1254246208 is the felt door filter for the Electrolux Iron Aid EDI97170W condenser dryer. It works together with the air-intake lint filter 1254242504 in the lower door opening; Electrolux says to clean both after every cycle. Replace it when damaged.

After the change: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Fits the EDI97170W.

1366339024 is the lint filter for the Electrolux EDH3284PDW and AEG T96690IH heat pump dryers. Clean it after each cycle and replace it when damaged.

After the change: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Fits the EDH3284PDW.

1366344032 is the grey base (basement) filter for the Electrolux EDH3284PDW heat pump dryer. It sits behind the plinth door at the bottom and keeps fluff off the heat exchanger. It is cleaned together with the small base filter 1366349015. Replace it when torn.

After the change: No reset needed. The clean-filter notification clears after you clean the filter and start the next programme.

Fits the EDH3284PDW.

140075066047 is the fluff filter for the Electrolux EDH913R9WB and AEG 8000/9000 Series heat pump dryers (T858M6OBC, T859M6OBC, T959M6ORS). It sits in the door opening. Clean it after each cycle and replace it when damaged.

After the change: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Fits the EDH913R9WB.

140200821084 is a fluff filter assembly for the AEG 9000X Series (T959V6PDC, T959V6PRC) and Electrolux EDH912R9WC heat pump dryers. Some builds take 140200821027 instead. Clean it after each cycle and replace it when damaged.

After the change: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Fits the EDH912R9WC.