The Bosch WTA3200AU takes the Bosch fluff filter 00096423 (WTL5200AU condenser) as its lint filter. Fitment confirmed against the manufacturer's compatibility list.
Your dryer
Bosch WTA3200AU
Clothes dryer
Confirmed against Bosch's listConfirmed against Bosch's own compatibility list
Not yours? Change
Takes the 00096423 lint filter
fluff filter 00096423 (WTL5200AU condenser) · check the code printed on your old filter before ordering.
Your dryer
Clothes dryer
Confirmed against Bosch's listConfirmed against Bosch's own compatibility list
Takes the 00096423
Lint filter · check the code on your old filter.
Other Bosch dryers that take the 00096423
GenuineGenuine Bosch
See seller
Bosch Australia · 26 OctBosch Australia · checked 26 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Bosch. Compatible: another brand.Genuine is made by Bosch. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
How long it lasts
Replace it when the mesh is torn or the frame is damaged; clean it after every drying cycle.
After replacing: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.
How to change the lint filter in your Bosch WTA3200AU
Watch the guide or follow the steps.
- 1Open the door, remove any fluff from the door and around the door opening, and pull out the fluff filter.
- 2Remove the fluff from the shaft the filter sits in. Do not let fluff fall into the open shaft.
- 3Open the fluff filter and sweep the fluff off with your hand. If it is very dirty or blocked, rinse it with warm water and dry it thoroughly.
- 4Close the filter and push it fully back in, then close the door. Do not run the dryer without the filter or with a damaged one.
Every number this part goes by
- Retail name:
- 00096423
- Retail name:
- 96423
Sellers list any of these; they are the same part.
About your Bosch WTA3200AU
Bosch clothes dryer — Bosch vented dryer. Its lint filter is the fluff filter 00096423 (WTL5200AU condenser), part 00096423.
Where the model number is: The model number is on the rating label inside the door or around the door opening; on some dryers it is on the back. It reads like WTW87565AU or EDH3284PDW.
Common questions
- Which lint filter fits the Bosch WTA3200AU?
- The Bosch WTA3200AU takes the Bosch fluff filter 00096423 (WTL5200AU condenser).
- Where can I buy the 00096423 in Australia?
- We link to 1 Australian seller for the 00096423; the seller's page shows the current price.
- How do I fit the 00096423 in a Bosch WTA3200AU?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Lint gets past a torn filter into the condenser or heat pump, airflow drops and each load takes longer to dry.
- Is there anything to reset afterwards?
- No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.
Something looks wrong with the WTA3200AU match? . Reports go to a person, not a bot.