The Siemens WT46G400AU takes the Bosch / Siemens one-piece fluff filter 00752387 (condenser dryers) as its lint filter; Australian sellers list it from A$26.51 as of 29 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your dryer
Siemens WT46G400AU
Clothes dryer
Confirmed against Siemens's listConfirmed against Siemens's own compatibility list
Not yours? Change
Takes the 00752387 lint filter
one-piece fluff filter 00752387 (condenser dryers) · check the code printed on your old filter before ordering.
Your dryer
Clothes dryer
Confirmed against Siemens's listConfirmed against Siemens's own compatibility list
Takes the 00752387
Lint filter · check the code on your old filter.
Other Siemens dryers that take the 00752387
GenuineGenuine Bosch
$26.51
Bosch Australia · 29 OctLowest genuine · Bosch Australia · checked 29 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Bosch. Compatible: another brand.Genuine is made by Bosch. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $26.51
Bosch Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Opens Bosch Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when the mesh is torn or the frame is damaged; clean it after every drying cycle.
After replacing: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.
How to change the lint filter in your Siemens WT46G400AU
Watch the guide or follow the steps.
- 1Open the door, remove any fluff from the door and around the door opening, and pull out the fluff filter.
- 2Remove the fluff from the shaft the filter sits in. Do not let fluff fall into the open shaft.
- 3Open the fluff filter and sweep the fluff off with your hand. If it is very dirty or blocked, rinse it with warm water and dry it thoroughly.
- 4Close the filter and push it fully back in, then close the door. Do not run the dryer without the filter or with a damaged one.
Every number this part goes by
- Retail name:
- 00752387
- Retail name:
- 752387
- Replaces:
- 00753637
Sellers list any of these; they are the same part.
About your Siemens WT46G400AU
Siemens clothes dryer — iQ500 condenser tumble dryer. Its lint filter is the one-piece fluff filter 00752387 (condenser dryers), part 00752387.
Where the model number is: The model number is on the rating label inside the door or around the door opening; on some dryers it is on the back. It reads like WTW87565AU or EDH3284PDW.
Fits these 5 models
Bosch3 models
Siemens2 models
Common questions
- Which lint filter fits the Siemens WT46G400AU?
- The Siemens WT46G400AU takes the Bosch / Siemens one-piece fluff filter 00752387 (condenser dryers).
- Where can I buy the 00752387 in Australia?
- We track 2 Australian sellers for the 00752387; the lowest listed price when we last checked was A$26.51 at Bosch Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 00752387 in a Siemens WT46G400AU?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Lint gets past a torn filter into the condenser or heat pump, airflow drops and each load takes longer to dry.
- Is there anything to reset afterwards?
- No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.
Something looks wrong with the WT46G400AU match? . Reports go to a person, not a bot.