The Bonaire VSL75 takes the Bonaire Filtercool pad 6050423SP (120 mm, large cabinet, single) as its pad kit; Australian sellers list it from A$191.25 each as of 1 November 2026. Fitment confirmed against the manufacturer's compatibility list.
Your evaporative cooler
Bonaire VSL75
Evaporative cooler
Confirmed against Bonaire's listConfirmed against Bonaire's own compatibility list
Not yours? ChangeTakes the 6050423SP pad kit
Filtercool pad 6050423SP (120 mm, large cabinet, single) · check the code on your old part before ordering.
Integra II (2015 on) takes 120 mm Filtercool pads, sold singly: buy four, one per louvre panel. An Integra made before 2015 takes the thinner 90/100 mm pad instead: check the product code on the data plate under the lid.
Your evaporative cooler
Evaporative cooler
Confirmed against Bonaire's listConfirmed against Bonaire's own compatibility list
Takes the 6050423SP
Pad kit · check the code on your old part.
Integra II (2015 on) takes 120 mm Filtercool pads, sold singly: buy four, one per louvre panel. An Integra made before 2015 takes the thinner 90/100 mm pad instead: check the product code on the data plate under the lid.
Other Bonaire evaporative coolers that take the 6050423SP
GenuineGenuine Bonaire
See seller
Bonaire · 28 OctBonaire · checked 28 Oct
CompatibleCompatible option
$191.25 each
4-pack $765.00
Plumbonline · 1 NovPlumbonline · checked 1 Nov
Check sellerCheck seller details
Genuine: made by Bonaire. Compatible: another brand.Genuine is made by Bonaire. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $191.25 each · 4-pack $765.00
Plumbonline. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 3 listings from 2 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
2 listings from 1 seller
Opens Plumbonline in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when the pads are damaged or blocked, Bonaire says; check and hose them down at the start and end of summer, and have the cooler serviced every year.
After replacing: No pad reminder to reset. If your installer turned on the service reminder, the spanner icon on the Bonaire Navigator control appears after 700 hours of running; it is a service reminder, not a pad timer. Bonaire's Pad Clean function (Navigator control) runs a 20-minute wash of the pads.
How to change the pad kit in your Bonaire VSL75
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Isolate the cooler from the power before any work. Ensure the roof is safe to access, your ladder is securely positioned and use suitable safety equipment, Bonaire says; it recommends its trained service technicians or an authorised Climate Technologies service provider for this work.
- 2Remove a louvre panel: lift it about 15 mm off the corner post notch, tilt it back from the top and lift it away. Put it down where it will not be damaged.
- 3Take the old pad out of the louvre panel: remove the old clips, or cut off the old plastic retaining spikes with side cutters.
- 4Place the new pad in the louvre panel and fix it with new Filtercool clips and washers (retaining spikes on older units), pushed through the pad onto the vertical ribs until the pad sits firm against them.
- 5Refit the louvre and repeat for the others, then restore the power and run the cooler. Check the pads wet evenly; the Navigator control's Pad Clean function runs a 20-minute wash.
Every number this part goes by
- Retail name:
- 6050423SP
Sellers list any of these; they are the same part.
About your Bonaire VSL75
Bonaire evaporative cooler — Integra II (2015 on). Its pad kit is the Filtercool pad 6050423SP (120 mm, large cabinet, single), part 6050423SP.
Other pad kits that fit this evaporative cooler: Bonaire Filtercool pad 6050415SP (90/100 mm, large cabinet, single). For an Integra made before 2015 (label VSL75/70, or product code 6050028, 6060038 or 6070038 on the data plate): it takes the 90/100 mm large-cabinet pad 6050415SP instead.
Where the model number is: The model is on the label inside the cooler or on its control box, and in the manual. Don't go on the roof to look: the manual or the installer's paperwork usually has it.
Fits these 2 Bonaire models
VSH85. Integra II (2015 on) takes 120 mm Filtercool pads, sold singly: buy four, one per louvre panel.
VSL75. Integra II (2015 on) takes 120 mm Filtercool pads, sold singly: buy four, one per louvre panel. An Integra made before 2015 takes the thinner 90/100 mm pad instead: check the product code on the data plate under the lid.
Common questions
- Which pad kit fits the Bonaire VSL75?
- The Bonaire VSL75 takes the Bonaire Filtercool pad 6050423SP (120 mm, large cabinet, single). Integra II (2015 on) takes 120 mm Filtercool pads, sold singly: buy four, one per louvre panel. An Integra made before 2015 takes the thinner 90/100 mm pad instead: check the product code on the data plate under the lid.
- Where can I buy the 6050423SP in Australia?
- We track 2 Australian sellers for the 6050423SP; the lowest listed price when we last checked was A$191.25 at Plumbonline. Prices are re-checked daily and dated on this page.
- How do I fit the 6050423SP in a Bonaire VSL75?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Clogged pads pass less air and water, so the cooler blows warmer air, and old pads can smell musty.
- How do I reset the reminder?
- No pad reminder to reset. If your installer turned on the service reminder, the spanner icon on the Bonaire Navigator control appears after 700 hours of running; it is a service reminder, not a pad timer. Bonaire's Pad Clean function (Navigator control) runs a 20-minute wash of the pads.
Something looks wrong with the VSL75 match? . Reports go to a person, not a bot.