The Braemar EA120 takes the Braemar EA aspen wood wool pad 100258 (large, single) as its pad kit; Australian sellers list it from A$58.75 each as of 1 November 2026. Fitment confirmed against the manufacturer's compatibility list.
Your evaporative cooler
Braemar EA120
Evaporative cooler
Confirmed against Braemar's listConfirmed against Braemar's own compatibility list
Not yours? Change
Takes the 100258 pad kit
EA aspen wood wool pad 100258 (large, single) · check the code on your old part before ordering.
Seeley sells aspen pads one at a time: order one for each pad frame on your cooler.
Your evaporative cooler
Evaporative cooler
Confirmed against Braemar's listConfirmed against Braemar's own compatibility list
Takes the 100258
Pad kit · check the code on your old part.
Seeley sells aspen pads one at a time: order one for each pad frame on your cooler.
Other Braemar evaporative coolers that take the 100258
GenuineGenuine Braemar
See seller
Seeley International · 28 OctSeeley International · checked 28 Oct
CompatibleCompatible option
$58.75 each
4-pack $235.00
Plumbonline · 1 NovPlumbonline · checked 1 Nov
Check sellerCheck seller details
Genuine: made by Braemar. Compatible: another brand.Genuine is made by Braemar. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $58.75 each · 4-pack $235.00
Plumbonline. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 3 listings from 2 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
2 listings from 1 seller
Opens Plumbonline in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when the pads are clogged, or the wood wool has shrunk away from the top corners, Seeley says; have them checked at the service before summer, at least every 2 years.
After replacing: No pad reminder to reset. After fitting new pads, run Pad Flush from the MagIQtouch settings menu if your cooler has one, or fill the tank, run the pump for about 5 minutes and drain it, to clear the smell of new pads.
How to change the pad kit in your Braemar EA120
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Turn the cooler off at the wall control, then switch it off at the isolating switch inside the cooler. Seeley recommends an authorised Seeley dealer or service agent for any work on the roof: climbing onto the roof is hazardous, and its manuals say maintenance is for a qualified, licensed technician.
- 2Working at heights needs extra safety precautions, Seeley warns: only go up if you can reach the cooler safely. Remove the pad frames and take out the filter pad retaining wire.
- 3Lift out the old wood wool pad and fit the new one, teasing the wood wool out evenly so it fills the frame right up to the top corners.
- 4Refit the retaining wire and the frames, switch the power back on and run the cooler. A wet-timber smell from new pads is normal for a short while, Seeley says.
Every number this part goes by
- Retail name:
- 100258
Sellers list any of these; they are the same part.
About your Braemar EA120
Braemar evaporative cooler — EA (Breezair and Braemar). Its pad kit is the EA aspen wood wool pad 100258 (large, single), part 100258.
Where the model number is: The model is on the label inside the cooler or on its control box, and in the manual. Don't go on the roof to look: the manual or the installer's paperwork usually has it.
Fits these 6 Braemar models
Common questions
- Which pad kit fits the Braemar EA120?
- The Braemar EA120 takes the Braemar EA aspen wood wool pad 100258 (large, single). Seeley sells aspen pads one at a time: order one for each pad frame on your cooler.
- Where can I buy the 100258 in Australia?
- We track 2 Australian sellers for the 100258; the lowest listed price when we last checked was A$58.75 at Plumbonline. Prices are re-checked daily and dated on this page.
- How do I fit the 100258 in a Braemar EA120?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Clogged pads pass less air and water, so the cooler blows warmer air, and old pads can smell musty.
- How do I reset the reminder?
- No pad reminder to reset. After fitting new pads, run Pad Flush from the MagIQtouch settings menu if your cooler has one, or fill the tank, run the pump for about 5 minutes and drain it, to clear the smell of new pads.
Something looks wrong with the EA120 match? . Reports go to a person, not a bot.