The Breezair EZQ175 takes the Breezair Chillcel medium pad 4-pack 114620 (90 mm) as its pad kit; Australian sellers list it from A$358.00 as of 1 November 2026. Fitment confirmed against the manufacturer's compatibility list.
Your evaporative cooler
Breezair EZQ175
Evaporative cooler
Confirmed against Breezair's listConfirmed against Breezair's own compatibility list
Not yours? Change
Takes the 114620 pad kit
Chillcel medium pad 4-pack 114620 (90 mm) · check the code on your old part before ordering.
Seeley's parts list gives this sloping-base model two packs: this 4-pack (114620) and the tapered 3-pack 114576. A full re-pad takes both.
Your evaporative cooler
Evaporative cooler
Confirmed against Breezair's listConfirmed against Breezair's own compatibility list
Takes the 114620
Pad kit · check the code on your old part.
Seeley's parts list gives this sloping-base model two packs: this 4-pack (114620) and the tapered 3-pack 114576. A full re-pad takes both.
Other Breezair evaporative coolers that take the 114620
GenuineGenuine Breezair
$407.00
HVAC Shop · 1 NovLowest genuine · HVAC Shop · checked 1 Nov
CompatibleCompatible option
$358.00
Plumbonline · 1 NovPlumbonline · checked 1 Nov
Check sellerCheck seller details
Genuine: made by Breezair. Compatible: another brand.Genuine is made by Breezair. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $358.00
Plumbonline. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
This evaporative cooler also takes a tapered pad pack
- Breezair Chillcel tapered pad 3-pack 114576 (90 mm)See the tapered pad pack
Needed as well as the 4-pack on this sloping-base model: one front pad and two tapered side pads. Separate from the pad kit.
Compare 3 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
1 seller
Opens Plumbonline in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when the pads are salted up, Breezair says; have them checked at the service before summer, which Seeley asks for at least every 2 years on a home cooler.
After replacing: No pad reminder to reset. After fitting new pads, run Pad Flush from the MagIQtouch settings menu if your cooler has one, or fill the tank, run the pump for about 5 minutes and drain it, to clear the smell of new pads.
How to change the pad kit in your Breezair EZQ175
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Turn the cooler off at the wall control, then switch it off at the isolating switch inside the cooler. Seeley recommends an authorised Seeley dealer or service agent for any work on the roof: climbing onto the roof is hazardous, and its manuals say maintenance is for a qualified, licensed technician.
- 2Working at heights needs extra safety precautions, Seeley warns: only go up if you can reach the cooler safely. Remove each pad frame: take out the clips, lever the top of the frame away from the lid with a flat screwdriver, pivot it outwards and lift it off.
- 3Note where each frame came from. Thicker or rebated pads (EXS, EXH210, EXQ210, EZQ215) must go back in the same place: stickers on the fan scroll show the positions. On sloping-base models (EZQ, EZH, EV, EZ) refit the front and two tapered pads from the 3-pack where the old ones were.
- 4Pull out the pad pins and washers and lift out the old pads. Fit each new Chillcel pad with its 30 mm header block at the top, and push new pins through until the pin heads sit flush with the frame and the washers sit flush with the pad.
- 5Refit the frames and clips, switch the power back on and run the cooler; never run it with the pad frames off. Flush the new pads: use Pad Flush in the MagIQtouch settings menu if you have it, or fill the tank, run the pump for about 5 minutes and drain it.
Every number this part goes by
- Retail name:
- 114620
Sellers list any of these; they are the same part.
About your Breezair EZQ175
Breezair evaporative cooler — Icon EZQ, sloping base (2014 to 2024). Its pad kit is the Chillcel medium pad 4-pack 114620 (90 mm), part 114620.
Also in this evaporative cooler: Breezair Chillcel tapered pad 3-pack 114576 (90 mm). Needed as well as the 4-pack on this sloping-base model: one front pad and two tapered side pads.
Where the model number is: The model is on the label inside the cooler or on its control box, and in the manual. Don't go on the roof to look: the manual or the installer's paperwork usually has it.
Fits these 14 Breezair models
Common questions
- Which pad kit fits the Breezair EZQ175?
- The Breezair EZQ175 takes the Breezair Chillcel medium pad 4-pack 114620 (90 mm). Seeley's parts list gives this sloping-base model two packs: this 4-pack (114620) and the tapered 3-pack 114576. A full re-pad takes both.
- Where can I buy the 114620 in Australia?
- We track 3 Australian sellers for the 114620; the lowest listed price when we last checked was A$358.00 at Plumbonline. Prices are re-checked daily and dated on this page.
- How do I fit the 114620 in a Breezair EZQ175?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Clogged pads pass less air and water, so the cooler blows warmer air, and old pads can smell musty.
- How do I reset the reminder?
- No pad reminder to reset. After fitting new pads, run Pad Flush from the MagIQtouch settings menu if your cooler has one, or fill the tank, run the pump for about 5 minutes and drain it, to clear the smell of new pads.
Something looks wrong with the EZQ175 match? . Reports go to a person, not a bot.