The Brivis AD76 takes the Brivis AD76 pad set 81019092 as its pad kit; Australian sellers list it from A$509.00 as of 1 November 2026. This fit is not yet confirmed against the manufacturer's list.
Your evaporative cooler
Brivis AD76
Evaporative cooler
Not confirmed by Brivis — check your old partNot yet confirmed by Brivis's own list — check the code on your old part
Not yours? Change
Takes the 81019092 pad kit
AD76 pad set 81019092 · check the code on your old part before ordering.
Brivis's parts list shows no pad for the AD76; Australian sellers list the Brivis set 81019092 for it.
Your evaporative cooler
Evaporative cooler
Not confirmed by Brivis — check your old partNot yet confirmed by Brivis's own list — check the code on your old part
Takes the 81019092
Pad kit · check the code on your old part.
Brivis's parts list shows no pad for the AD76; Australian sellers list the Brivis set 81019092 for it.
Other Brivis evaporative coolers and their pad kits
The 81019092 fits the AD76 only. These Brivis models take a different pad kit:
GenuineGenuine Brivis
$615.00
HVAC Shop · 1 NovLowest genuine · HVAC Shop · checked 1 Nov
CompatibleCompatible option
$509.00
Plumbonline · 1 NovPlumbonline · checked 1 Nov
Check sellerCheck seller details
Genuine: made by Brivis. Compatible: another brand.Genuine is made by Brivis. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $509.00
Plumbonline. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
1 seller
Opens Plumbonline in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when the pad material has holes or has broken down and no longer soaks up water, Brivis says; it lists pads as a consumable to check from the fifth year at its two-yearly service.
After replacing: No pad reminder to reset. After new pads are fitted, the cooler runs a Pre-Wet to soak them before the fan starts; a mild smell from new pads is normal and clears quickly, Brivis says.
How to change the pad kit in your Brivis AD76
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Brivis says its coolers must be maintained only by an authorised person, and recommends an authorised Brivis service technician: book one through Rinnai's Brivis service line. Before any work, switch the cooler off at the wall control and at its power isolating switch.
- 2The cooler must have safe and reasonable access, Brivis says; some installations need two service people. Do not go onto the roof without safe access.
- 3Check the old pads: Brivis says pads deteriorate over time and lose their ability to soak up water, so replace them when the material has holes or has broken down.
- 4Fit the new pad set in place of the old pads, then clean and flush the pads with water.
- 5With the pads in position, switch the isolating switch back on and run the cooler. Check the pump runs and the pads wet evenly; a mild smell from new pads is normal and clears quickly.
Every number this part goes by
- Retail name:
- 81019092
Sellers list any of these; they are the same part.
About your Brivis AD76
Brivis evaporative cooler — AD. Its pad kit is the AD76 pad set 81019092, part 81019092.
Where the model number is: The model is on the label inside the cooler or on its control box, and in the manual. Don't go on the roof to look: the manual or the installer's paperwork usually has it.
Fits this Brivis model
Brivis1 model
Brivis's parts list shows no pad for the AD76; Australian sellers list the Brivis set 81019092 for it.
Common questions
- Which pad kit fits the Brivis AD76?
- The Brivis AD76 takes the Brivis AD76 pad set 81019092. Brivis's parts list shows no pad for the AD76; Australian sellers list the Brivis set 81019092 for it.
- Where can I buy the 81019092 in Australia?
- We track 2 Australian sellers for the 81019092; the lowest listed price when we last checked was A$509.00 at Plumbonline. Prices are re-checked daily and dated on this page.
- How do I fit the 81019092 in a Brivis AD76?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Clogged pads pass less air and water, so the cooler blows warmer air, and old pads can smell musty.
- How do I reset the reminder?
- No pad reminder to reset. After new pads are fitted, the cooler runs a Pre-Wet to soak them before the fan starts; a mild smell from new pads is normal and clears quickly, Brivis says.
Something looks wrong with the AD76 match? . Reports go to a person, not a bot.