The Rinnai A30 takes the Brivis Advance pad set 81008767 (75 mm, F23 to F36) as its pad kit; Australian sellers list it from A$315.00 as of 1 November 2026. Fitment confirmed against the manufacturer's compatibility list.
Your evaporative cooler
Rinnai A30
Evaporative cooler
Confirmed against Rinnai's listConfirmed against Rinnai's own compatibility list
Not yours? Change
Takes the 81008767 pad kit
Advance pad set 81008767 (75 mm, F23 to F36) · check the code on your old part before ordering.
Your evaporative cooler
Evaporative cooler
Confirmed against Rinnai's listConfirmed against Rinnai's own compatibility list
Takes the 81008767
Pad kit · check the code on your old part.
Other Rinnai evaporative coolers that take the 81008767
GenuineGenuine Brivis
$358.00
HVAC Shop · 1 NovLowest genuine · HVAC Shop · checked 1 Nov
CompatibleCompatible option
$315.00
Plumbonline · 1 NovPlumbonline · checked 1 Nov
Check sellerCheck seller details
Genuine: made by Brivis. Compatible: another brand.Genuine is made by Brivis. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $315.00
Plumbonline. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
1 seller
Opens Plumbonline in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when the pad material has holes or has broken down and no longer soaks up water, Brivis says; it lists pads as a consumable to check from the fifth year at its two-yearly service.
After replacing: No pad reminder to reset. After new pads are fitted, the cooler runs a Pre-Wet to soak them before the fan starts; a mild smell from new pads is normal and clears quickly, Brivis says.
How to change the pad kit in your Rinnai A30
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Brivis says its coolers must be maintained only by an authorised person, and recommends an authorised Brivis service technician: book one through Rinnai's Brivis service line. Before any work, switch the cooler off at the wall control and at its power isolating switch.
- 2The cooler must have safe and reasonable access, Brivis says; some installations need two service people. Do not go onto the roof without safe access.
- 3Check the old pads: Brivis says pads deteriorate over time and lose their ability to soak up water, so replace them when the material has holes or has broken down.
- 4Fit the new pad set in place of the old pads, then clean and flush the pads with water.
- 5With the pads in position, switch the isolating switch back on and run the cooler. Check the pump runs and the pads wet evenly; a mild smell from new pads is normal and clears quickly.
Every number this part goes by
- Retail name:
- 81008767
Sellers list any of these; they are the same part.
About your Rinnai A30
Rinnai evaporative cooler — A Series. Its pad kit is the Advance pad set 81008767 (75 mm, F23 to F36), part 81008767.
Where the model number is: The model is on the label inside the cooler or on its control box, and in the manual. Don't go on the roof to look: the manual or the installer's paperwork usually has it.
Common questions
- Which pad kit fits the Rinnai A30?
- The Rinnai A30 takes the Brivis Advance pad set 81008767 (75 mm, F23 to F36).
- Where can I buy the 81008767 in Australia?
- We track 2 Australian sellers for the 81008767; the lowest listed price when we last checked was A$315.00 at Plumbonline. Prices are re-checked daily and dated on this page.
- How do I fit the 81008767 in a Rinnai A30?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Clogged pads pass less air and water, so the cooler blows warmer air, and old pads can smell musty.
- How do I reset the reminder?
- No pad reminder to reset. After new pads are fitted, the cooler runs a Pre-Wet to soak them before the fan starts; a mild smell from new pads is normal and clears quickly, Brivis says.
Something looks wrong with the A30 match? . Reports go to a person, not a bot.