LG fridge water filters by part number

The LG LT120F fresh air filter (ADQ73334010 in Australia, sold as AF120S) is a small carbon air filter that clips into a round cover at the back of the fridge compartment to reduce odours. LG Australia recommends changing it every 12 months or when the filter indicator lights, then holding the Fresh Air Filter button for three seconds. It is an air filter, not a water filter.

Change it every 12 months; 3 steps, no tools.

After the change: Press and hold the Fresh Air Filter button for 3 seconds to reset the replacement reminder. (LG US says 6 months; LG AU says 12 months.)

Fits 92 LG models: GC-B247ESL, GC-D247SL, GC-L247ENSL, GC-P247ESL, GF-5D712BSL, GF-5D712SL, GF-5D906SL, GF-5L712PL, GF-6D725BGL, GF-AD701BSL, GF-AD701SL, GF-AD910SL and 80 more.

The LG LT1000P (ADQ74793501, sold in Australia as AGF80300705) is the internal filter for LG French door fridges from about 2018. LG certifies it to NSF/ANSI 42, 53 and 401, covering chlorine taste and odour, lead, asbestos and some pharmaceuticals and pesticides. LG recommends replacing it every six months or 200 gallons (about 757 litres).

Change it every 6 months; 4 steps, no tools.

After the change: Press and hold the Water Filter button for about three seconds to reset the indicator light.

Fits 35 LG models: GF-D700BSLC, GF-D700MBLC, GF-D706BSL, GF-D706MBL, GF-D708BSL, GF-D708MBSL, GF-L500MBL, GF-L500MWH, GF-L500PL, GF-L570MBL, GF-L570PL, GF-L570PNL and 23 more.

The LG FSS-002 (ADQ73693903) is the external inline filter for Australian LG side-by-side fridges such as the GS-L668PL and GS-V665MBL. It sits in a compartment at the back of the fridge and connects with screw caps on the water tube. LG lists WQA certification and a six-month interval; after fitting, hold the Water Filter button for three seconds and run water for about five minutes.

Change it every 6 months; 4 steps, no tools.

After the change: Press and hold the Water Filter button for three seconds to reset the Replacement Filter icon.

Fits 29 LG models: GC-D237SL, GC-L197DSL, GC-L197HFS, GC-P197DPL, GC-P197DPSL, GC-P197HPL, GC-P197STL, GC-P227FSL, GF-B620SL, GR-D257SL, GS-D600MBLC, GS-D600PLC and 17 more.

The LG LT700P (ADQ36006101, sold in Australia as AGF80300702) is the internal filter for LG French door fridges from around 2013 to 2018. It sits in the top-left of the fridge compartment and hinges down for replacement. LG certifies it to NSF/ANSI 42 and 53 and rates it at 200 gallons (about 757 litres) or six months.

Change it every 6 months; 4 steps, no tools.

After the change: Press and hold the Water Filter button for three seconds to reset the indicator (stated on LG AU LT1000P, LT500P and FSS-002 pages; the LT700P page refers to the user manual).

Fits 17 LG models: GF-4L601PL, GF-D613PL, GF-D613SL, GF-L613PL, GF-L613PL5, GF-L650SL, GF-SD730SL, GF-SL730SL, GM-F208ST, GR-D730SL, GR-D907SL, GR-L218ASL and 5 more.

The LG LT600P (5231JA2006A) is a long cylindrical internal filter for older LG side-by-side, bottom-mount and some French door fridges. It fits with a quarter turn into a housing at the top of the fridge compartment. LG rates it at 300 gallons (about 1,135 litres) or six months and certifies it to NSF/ANSI 42 and 53.

Change it every 6 months; 4 steps, no tools.

After the change: On models with an indicator, press and hold the Water Filter (or Filter Reset) button for three seconds (general LG guidance; not stated on the LT600P page).

Fits 13 LG models: GM-F238SS, GR-F218NI, GR-F218NID, GR-F258TS, GR-G267TV, GR-L218STB, GR-L218STLA, GR-L218STSL, GR-L219STS, GR-L219STSL, GR-L267NI, GR-L267NIS and 1 more.

The LG LT500P (5231JA2002A, listed by LG Australia as ADQ72910911) is a short push-in internal filter for older LG side-by-side and bottom-mount fridges. It sits in a housing in the upper fridge compartment. LG rates it at 200 gallons (about 757 litres) or six months. After fitting, flush about 2.5 gallons and hold the Water Filter button for three seconds.

Change it every 6 months; 4 steps, no tools.

After the change: Press and hold the Water Filter button for three seconds to reset the indicator light.

Fits 8 LG models: GC-L197NFS, GC-L197STF, GC-P197NFS, GC-P197WFS, GR-L207NI, GR-L247NI, GR-L247NIS, GR-P257STB.

The LG 5231JA2012A (also known as BL9808) is an external inline filter fitted in the water line behind older LG fridges with plumbed dispensers. LG Australia no longer lists this code; its current external replacement cartridge is ADQ73693901, and Australian retailers sell the two as equivalents. It is a push-fit inline cartridge changed every six months.

Change it every 6 months; 4 steps, no tools.

After the change: Older LG fridges with this external filter generally have no filter indicator; where one exists, hold the Water Filter button for three seconds (LG AU external filter page).

Fits 8 LG models: GR-L197NIS, GR-L197VS, GR-L197WVS, GR-L227STG, GR-L247STB, GR-P197NIS, GR-P197WVS, GR-P227STG.

The LG LT800P (ADQ73613401) is the internal filter for LG side-by-side and some French door fridges, housed in the left door behind the lower door bin. LG certifies it to NSF/ANSI 42 and 53 and says it removes 97% of benzene, 99% of atrazine and almost all mercury and lead. Rated at 200 gallons (about 757 litres) or six months.

Change it every 6 months; 4 steps, no tools.

After the change: Press and hold the Water Filter button for three seconds to reset the indicator (LG AU guidance across its filter pages).

Fits 7 LG models: GF-5D712BSL, GF-5D712SL, GF-5D906SL, GF-5L712PL, GF-AD701BSL, GF-AD701SL, GF-AD910SL.