FitMatch
Hurom silicone brushes for Elite, Gen 2 (HX082)

Cold press juicer silicone part

Hurom silicone brushes for Elite, Gen 2 (HX082)

HX082

Fits 3 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$4.98 each

2-pack $9.95

Hurom Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Hurom. Compatible: another brand.

Lowest price · $4.98 each · 2-pack $9.95

Hurom Australia. Every seller we track is listed below. Some links earn us a commission.

Open Hurom Australia

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Hurom AustraliaGenuine · checked 28 Oct$4.98 each2-pack $9.95Open
Open cheapest seller · $4.98 each · 2-pack $9.95

Opens Hurom Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when the brushes are torn or worn; Hurom gives no set interval.

After replacing: No reset: Hurom juicers have no reminder for this part.

How to change the HX082 silicone part

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Switch the juicer off and unplug it. Open the hopper and lift out the screw, strainer and spinning brush.
  2. 2Separate the strainer from the spinning brush holder.
  3. 3Hold the outer side of each old silicone brush and pull it out in the direction of the arrow; pulling elsewhere can tear the brush or break the holder.
  4. 4Press each new brush into the holder, pulling the inner wing inward with your other hand so it sits in the grooves.
  5. 5Refit the strainer into the brush holder and reassemble the chamber.
Every number this part goes by
Retail name:
HX082

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 3 Hurom models

Hurom lists these brushes for the Elite series Gen 2; Gen 1 HF and HU-700 juicers take HX081.

Common questions
What does the HX082 fit?
The Hurom silicone brushes for Elite, Gen 2 (HX082) fits the Hurom HG Elite, HH Elite and HJ Elite.
Where can I buy the HX082 in Australia?
We track 1 Australian seller for the HX082; the lowest listed price when we last checked was A$4.98 at Hurom Australia. Prices are re-checked daily and dated on this page.
How do I fit the HX082?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A worn or stretched seal or wiper lets juice leak round the bowl or the strainer.
Is there anything to reset afterwards?
No reset: Hurom juicers have no reminder for this part.

Something looks wrong with the HX082 match? . Reports go to a person, not a bot.