Hurom cold press juicer filters and parts by part number

Hurom's Silicone Gasket (2 Pack) HX112 suits the Hurom H300e, H200, H100, H26, H25, HQ, Elite models and H22. Replace a gasket when it is torn or stretched or juice leaks; Hurom gives no set interval for these models. Hurom's own videos show how its silicone parts plug in and come out.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 10 Hurom models: H100, H200, H22, H25, H26, H300e, HG Elite, HH Elite, HJ Elite, HQ Series.

Hurom's Ultem Strainer (Fine) HX251 is the fine mesh strainer for the H26 and H25 Alpha, HAA, HAE and HAF; Hurom's part data also lists the H30 and H31 Giugiaro models. It sits inside the spinning brush, around the auger. Replace it if the mesh is torn or damaged; Hurom gives no set interval. A coarse version is HX252.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 7 Hurom models: H25, H26, H30, H31, HAA, HAE, HAF.

Hurom's Ultem Strainer (Coarse) HX252 is the coarse strainer for the H26 and H25 Alpha, HAA, HAE and HAF, and the H30 and H31 in Hurom's part data. Its larger holes let more pulp into the juice than the fine strainer HX251.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 7 Hurom models: H25, H26, H30, H31, HAA, HAE, HAF.

Hurom's Ultem Strainer (Fine) HX150 is the fine mesh strainer for the Hurom Elite models (HG, HH and HJ Elite, and HF) and the HQ series. It sits inside the spinning brush, around the auger. Replace it if the mesh is torn or damaged; Hurom gives no set interval. A coarse version is HX155.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 4 Hurom models: HG Elite, HH Elite, HJ Elite, HQ Series.

Hurom's Silicone Gasket HX110 suits the older Hurom HU-300, HU-400 and HU-500 juicers and the HE; Hurom's part data also lists the HU-700 and HC. Replace it when it is torn or stretched or juice leaks; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 4 Hurom models: HU-300, HU-400, HU-500, HU-700.

Hurom's Ultem Strainer (Coarse) HX155 is the coarse strainer for the Hurom Elite models and the HQ series. Its larger holes let more pulp into the juice than the fine strainer HX150.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 4 Hurom models: HG Elite, HH Elite, HJ Elite, HQ Series.

Hurom's Auger Screw HX140 is the auger (juicing screw) for the Hurom Elite models (HG, HH, HJ and HF). It turns inside the strainer to crush and press the produce. Hurom Australia sells it as a separate part; replace it if it is cracked or damaged. Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 3 Hurom models: HG Elite, HH Elite, HJ Elite.

Hurom's Auger Screw HX254 is the auger (juicing screw) for the H26 and H25 Alpha and the HAA. It turns inside the strainer to crush and press the produce. Hurom Australia sells it as a separate part; replace it if it is cracked or damaged. Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 3 Hurom models: H25, H26, HAA.

Hurom's Silicone Brushes HX258 are a pack of two silicone brushes for the spinning brush holder of the H26 and H25 Alpha and the HAA. They wipe pulp off the strainer as it turns. Hurom says a brush that isn't inserted properly can wear or fall out. Replace them when they are torn or worn; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 3 Hurom models: H25, H26, HAA.

Hurom's Silicone Brushes HX082 are a pack of two silicone brushes for the spinning brush holder of the Hurom Elite series (Gen 2: HG, HH, HJ and HF). They wipe pulp off the strainer as it turns. Hurom says a brush that isn't inserted properly can wear or fall out. Replace them when they are torn or worn; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 3 Hurom models: HG Elite, HH Elite, HJ Elite.

Hurom's Auger Packing HX4008 is a silicone packing Hurom Australia lists for the H400, H70 and H310a. Hurom's H400 and H70 books say silicone packings are consumables to replace every 6 to 12 months, and that juice leaks if a packing is fitted upside-down or only part way.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 3 Hurom models: H310a, H400, H70.

Hurom's Extraction Packing HX2011 is a silicone packing Hurom Australia lists for the H200 and H100. Replace it when it is torn or stretched or juice leaks. Hurom's own H200 and H100 videos show how its silicone parts plug in and come out.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 2 Hurom models: H100, H200.

Hurom's Auger Screw HX3040 is the auger (juicing screw) for the Hurom H30 and H31 Giugiaro juicers (hex shaft). It turns inside the strainer to crush and press the produce. Hurom Australia sells it as a separate part; replace it if it is cracked or damaged. Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 2 Hurom models: H30, H31.

Hurom's Auger Screw HX3401 is the auger (juicing screw) for the Hurom H34 and HAI (H-AI). It turns inside the strainer to crush and press the produce. Hurom Australia sells it as a separate part; replace it if it is cracked or damaged. Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 2 Hurom models: H34, HAI.

Hurom's Ultem Strainer (Fine) HX363 is the fine mesh strainer for the Hurom H34 and HAI (H-AI). It sits inside the spinning brush, around the screw. Hurom's H-AI manual says fine holes make clean juice; a coarse strainer (HX364) is sold for thicker juice. Replace it if the mesh is torn or damaged.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 2 Hurom models: H34, HAI.

Hurom's Silicone Brushes HX405 are a pack of two silicone brushes for the spinning brush holder of the Hurom H34 and HAI (H-AI). They wipe pulp off the strainer as it turns. Hurom says a brush that isn't inserted properly can wear or fall out. Replace them when they are torn or worn; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 2 Hurom models: H34, HAI.

Hurom's Silicone Brushes HX080 are a pack of two silicone brushes for the spinning brush holder of the Hurom HU-300 and HU-400 (white and orange brush holder). They wipe pulp off the strainer as it turns. Hurom says a brush that isn't inserted properly can wear or fall out. Replace them when they are torn or worn; Hurom gives no set interval. Hurom also lists HX084 for the HU-300.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 2 Hurom models: HU-300, HU-400.

Hurom's Silicone Brushes HX084 are a pack of two silicone brushes for the spinning brush holder of the Hurom HU-500, HE, HU-300 and HC. They wipe pulp off the strainer as it turns. Hurom says a brush that isn't inserted properly can wear or fall out. Replace them when they are torn or worn; Hurom gives no set interval. Hurom also lists HX080 for the HU-300.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 2 Hurom models: HU-300, HU-500.

Hurom's Extraction Packing HX513 is a silicone packing for the Hurom CP50 and CE50 commercial juicers. Replace it when it is torn or stretched or juice leaks; Hurom gives no interval for these models. An extraction packing holder (HX514) is also sold.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 2 Hurom models: CE50, CP50.

Hurom's Ultem Strainer (Coarse) HX364 is the coarse strainer for the Hurom H34 and HAI (H-AI). Hurom says its larger holes make thick juice with flesh in it; the fine strainer is HX363.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits 2 Hurom models: H34, HAI.

Hurom's Silicone Brushes HX081 are a pack of two silicone brushes for the spinning brush holder of the Hurom HU-700 and HF Gen 1. They wipe pulp off the strainer as it turns. Hurom says a brush that isn't inserted properly can wear or fall out. Replace them when they are torn or worn; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the HU-700.

Hurom's Auger HX145 is the auger (juicing screw) for the Hurom HQ series. It turns inside the strainer to crush and press the produce. Hurom Australia sells it as a separate part; replace it if it is cracked or damaged. Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the HQ Series.

Hurom's Ultem Strainer (Fine) HX200 is the fine mesh strainer for the Hurom H22 MK2 commercial juicer (HW series). It sits inside the brush holder, around the auger. Replace it if the mesh is torn or damaged; Hurom gives no set interval. A coarse version is HX205.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H22.

Hurom's Auger HX2003 is the auger (juicing screw) for the Hurom H200 (a Super Tough Ultem auger). It turns inside the strainer to crush and press the produce. Hurom Australia sells it as a separate part; replace it if it is cracked or damaged. Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H200.

Hurom's Auger Screw HX210 is the auger (juicing screw) for the Hurom H22 commercial juicer (HW series). It turns inside the strainer to crush and press the produce. Hurom Australia sells it as a separate part; replace it if it is cracked or damaged. Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H22.

Hurom's Silicone Brushes HX235 are a pack of two silicone brushes for the spinning brush holder of the Hurom H22 commercial juicer. They wipe pulp off the strainer as it turns. Hurom says a brush that isn't inserted properly can wear or fall out. Replace them when they are torn or worn; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H22.

Hurom's Multi-screw Auger/Strainer HX3001 is the all-in-one auger and strainer for the Hurom H300e. Hurom AU describes the H300e's strainer as a BPA-free Easy Clean multi-screw auger/strainer, with no separate mesh. Replace it if it is cracked or damaged and juicing suffers; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H300e.

Hurom's Multi-screw Auger/Strainer HX3021 is the all-in-one auger and strainer for the compact Hurom H310a. There is no separate mesh strainer: the multi-screw squeezes and strains the juice. Replace it if it is cracked or damaged and juicing suffers; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H310a.

Hurom's Extraction Packing HX3027 is a silicone packing for the compact Hurom H310a. Hurom Australia also sells the H310a's auger packing (HX4008) and chamber cover packing (HX3026). Replace it when it is torn or stretched or juice leaks; Hurom's books for its newer juicers call silicone packings consumables to replace every 6 to 12 months.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H310a.

Hurom's Fine Strainer HX3100 is the standard fine-mesh strainer for the Hurom H320n, the ultra-low-pulp model. It sits in the drum around the auger. Hurom Australia also sells a coarse strainer (HX3101) for the H320n. Replace it if the mesh is torn or damaged and juicing suffers; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H320n.

Hurom's Auger HX3102 is the auger (juicing screw) for the Hurom H320n. It turns inside the strainer to crush and press the produce. Hurom Australia sells it as a separate part; replace it if it is cracked or damaged. Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H320n.

Hurom's Extraction Packing HX3501 is a silicone packing for the Hurom H320n. Replace it when it is torn or stretched or juice leaks. Hurom Australia also sells the H320n's string gasket (HX3503).

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H320n.

Hurom's Extraction Packing HX3502 is a silicone packing for the Hurom H300e. Replace it when it is torn or stretched or juice leaks; Hurom's books for its newer Easy Clean juicers (H400, H70) call silicone packings consumables to replace every 6 to 12 months, and say the juicer may leak if they aren't fitted properly.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H300e.

Hurom's Auger Screw HX400 is the auger (juicing screw) for the Hurom H100 (an Ultem auger with a gasket seal; the gasket is HX1008). It turns inside the strainer to crush and press the produce. Hurom Australia sells it as a separate part; replace it if it is cracked or damaged. Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H100.

Hurom's Extraction Packing HX4007 is a silicone packing for the Hurom H400. Hurom says its silicone packings are consumables to replace every 6 to 12 months, and that the juicer may leak if a packing isn't fitted properly. Hurom Australia also sells the H400's auger packing (HX4008).

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H400.

Hurom's Extraction Packing HX4011 is a silicone packing for the Hurom H70. Hurom's H70 book says silicone packings are consumables to replace every 6 to 12 months, and that the extraction packing goes back in convex part first. The H70's auger packing (HX4008) is sold separately.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H70.

Hurom's Ultem Strainer - Fine HX506 is the fine strainer for the Hurom CP50 commercial cold press juicer (part of its Pure Line straining system with the auger and brush holder). Replace it if the mesh is torn or damaged; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the CP50.

Hurom's Auger HX508 is the auger (juicing screw) for the Hurom CP50 commercial juicer. It turns inside the strainer to crush and press the produce. Hurom Australia sells it as a separate part; replace it if it is cracked or damaged. Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the CP50.

Hurom's Silicone Brushes HX512 are a pack of two silicone brushes for the spinning brush holder of the Hurom CP50 commercial juicer. They wipe pulp off the strainer as it turns. Hurom says a brush that isn't inserted properly can wear or fall out. Replace them when they are torn or worn; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the CP50.

Hurom's Fine Strainer (Outer Only) HX1002 is the outer half of the H100's two-piece Easy Clean strainer. The inner strainer (HX1001) and a coarse outer strainer (HX1003) are sold separately. Replace it if it is cracked or damaged and juicing suffers; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H100.

Hurom's Fine Strainer (Outer Only) HX2006 is the outer half of the H200's two-piece Easy Clean strainer. The inner strainer (HX2005) is sold separately, as is a coarse outer strainer (HX2007). Replace it if it is cracked or damaged and juicing suffers; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H200.

Hurom's Multi-screw Auger/Strainer (Lower) HX4003b is the bottom part of the H400's second-generation Easy Clean multi-screw, which squeezes and strains the juice with no mesh strainer. Hurom Australia sells the upper part (HX4003a) separately. Replace the part that is cracked or damaged; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H400.

Hurom's Multi-screw Auger/Strainer - Lower HX704 is the bottom part of the H70's Easy Clean multi-screw, which squeezes and strains the juice. The upper part (HX703) is sold separately; Hurom also sells complete tops with an Easy Clean or mesh strainer. Replace the part that is cracked or damaged; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H70.

Hurom's Inner Strainer (Inner Only) HX1001 is the inner half of the H100's two-piece Easy Clean strainer; the fine outer strainer is HX1002. Replace it if it is cracked or damaged and juicing suffers; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H100.

Hurom's Coarse Strainer (Outer Only) HX1003 is a coarse outer strainer for the H100's two-piece strainer. It lets more pulp into the juice than the fine outer strainer (HX1002) and works with the same inner strainer.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H100.

Hurom's Auger Gasket HX1008 is the gasket for the H100's auger; Hurom Australia describes the H100's auger as a 'Super Tough Ultem Auger with Gasket Seal'. Replace it when it is torn or stretched or juice leaks; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H100.

Hurom's Inner Strainer (Inner Only) HX2005 is the inner half of the H200's two-piece Easy Clean strainer; the fine outer strainer is HX2006. Replace it if it is cracked or damaged and juicing suffers; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H200.

Hurom's Coarse Strainer (Outer Only) HX2007 is a coarse outer strainer for the H200's two-piece strainer. It lets more pulp into the juice than the fine outer strainer (HX2006) and works with the same inner strainer.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H200.

Hurom's Coarse Strainer HX205 is the coarse strainer for the Hurom H22 MK2 commercial juicer (HW series). Its larger holes let more pulp into the juice than the fine strainer HX200.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H22.

Hurom's Coarse Strainer HX3101 is the coarse strainer for the Hurom H320n. Its larger holes let more pulp into the juice than the standard fine strainer (HX3100). Replace it if the mesh is torn or damaged; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H320n.

Hurom's Multi-screw Auger/Strainer (Upper) HX4003a is the top part of the H400's two-part Easy Clean multi-screw. The lower part (HX4003b) is sold separately. Replace the part that is cracked or damaged; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H400.

Hurom's Multi-screw Auger/Strainer - Upper HX703 is the top part of the H70's Easy Clean multi-screw. The lower part (HX704) is sold separately. Replace the part that is cracked or damaged; Hurom gives no set interval.

After the change: No reset: Hurom juicers have no reminder for this part.

Fits the H70.