Cold press juicer silicone part
Kuvings silicone wing for the B3000 (5000-0053A-3)
5000-0053A-3
Fits 1 model
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Kuvings
$8.00
Kuvings Australia · 28 OctLowest genuine · Kuvings Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Kuvings. Compatible: another brand.Genuine is made by Kuvings. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $8.00
Kuvings Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Kuvings Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is torn, stretched or worn, or juice leaks; Kuvings gives no set interval.
After replacing: No reset: Kuvings juicers have no reminder for this part.
How to change the 5000-0053A-3 silicone part
Watch the guide or follow the steps.
- 1Switch the juicer off and unplug it.
- 2Open the lid and lift out the juicing screw, then the strainer and rotation wiper.
- 3Pull the old silicone wings (brushes) out of the rotation wiper.
- 4Insert each new wing into its slot with the tail of the brush pointing down, from bottom to top through the wide part in the middle of the wiper.
- 5Refit the strainer into the wiper, place them in the bowl with the red dots lined up, refit the screw and close the lid.
Every number this part goes by
- Retail name:
- 5000-0053A-3
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits this Kuvings model
Kuvings1 model
Common questions
- What does the 5000-0053A-3 fit?
- The Kuvings silicone wing for the B3000 (5000-0053A-3) fits the Kuvings B3000.
- Where can I buy the 5000-0053A-3 in Australia?
- We track 1 Australian seller for the 5000-0053A-3; the lowest listed price when we last checked was A$8.00 at Kuvings Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 5000-0053A-3?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn or stretched seal or wiper lets juice leak round the bowl or the strainer.
- Is there anything to reset afterwards?
- No reset: Kuvings juicers have no reminder for this part.
Something looks wrong with the 5000-0053A-3 match? . Reports go to a person, not a bot.