Kuvings cold press juicer filters and parts by part number

Kuvings' Silicone Wing Set to suit C & E Juicers (SPARE-PRO-WINGSET) is the set of silicone wings (the manual calls them silicone brushes) that fit the rotation wiper of the EVO820, EVO810, MOTIV1, E8000, E6000, C8000, C7000 and C6500. They wipe pulp off the strainer as it turns. Replace them when they are torn or worn.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 8 Kuvings models: C6500, C7000, C8000, E6000, E8000, EVO810, EVO820, MOTIV1.

Kuvings' Juicing Screw (Auger) to Suit C & E Series Juicers (SPARE-PRO-AUGER) is the auger for the EVO820, EVO810, MOTIV1, E8000, C8000, C7000 and C6500. It turns inside the strainer to crush and press the produce. Kuvings recommends replacing the screw if it is damaged and juicing suffers. The E6000 takes the B-series auger instead.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 7 Kuvings models: C6500, C7000, C8000, E8000, EVO810, EVO820, MOTIV1.

Kuvings' Juice Strainer to suit C & E Juicers (SPARE-PRO-STRAINER) is the fine juice strainer for the EVO820 and EVO810, E8000 and E6000, and C8000, C7000 and C6500. It sits inside the rotation wiper, and the juicing screw turns inside it. Kuvings recommends replacing the strainer if it is damaged and juicing suffers. A coarse strainer is sold separately.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 7 Kuvings models: C6500, C7000, C8000, E6000, E8000, EVO810, EVO820.

Kuvings' Spare Parts Pack for its professional juicers (SPARE-SSPPJ) holds two sets of silicone wings for the rotation wiper and two silicone rings for the strainer. Kuvings lists it for the EVO820, EVO810, C8000, C7000, C6500, E8000 and MOTIV1. The wings keep the juice flowing; Kuvings says a ring that isn't firmly in place lets juice leak from the bottom of the bowl.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 7 Kuvings models: C6500, C7000, C8000, E8000, EVO810, EVO820, MOTIV1.

Kuvings' Silicone Ring for Juice Strainer (SPARE-PRO-STRAINERSEAL) fits at the base of the juice strainer and seals it to the juicing bowl. It suits the C8000, C7000, C6500, EVO820 and EVO810, in two styles that don't swap: Flat 45 mm or Sunken 35 mm. Kuvings says to compare the base of your juicing bowl with its photos before ordering.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 5 Kuvings models: C6500, C7000, C8000, EVO810, EVO820.

Kuvings' Silicone Ring for BOWL (SPARE-SILICONE-BOWLRING) is the silicone ring for the juicing bowl. Kuvings Australia lists it under the B6000, B8000, B3000, E6000 and Silent Juicer 998SAS spare parts. A ring that isn't sealing can let juice seep out onto the juicer body. Replace it when it is torn or stretched.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 5 Kuvings models: 998SAS, B3000, B6000, B8000, E6000.

Kuvings' Juicing Screw (Auger) for B Series Juicers (SPARE-B-SERIES-AUGER) is the auger for the B3000, B6000, B8000 and E6000. It turns inside the strainer to crush and press the produce. Kuvings recommends replacing the screw if it is damaged and juicing suffers; it gives no set interval.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 4 Kuvings models: B3000, B6000, B8000, E6000.

Kuvings' Strainer for B Series Juicers (SPARE-B-SERIES-STRAINER) is the replacement juice strainer for the B6000, B8000 and B3000. Kuvings says it replaces a worn or damaged original strainer and helps restore juicing performance. It sits inside the rotation wiper, and the juicing screw turns inside it.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 3 Kuvings models: B3000, B6000, B8000.

Kuvings' Coarse Juice Strainer (SPARE-EVO-COARSE) is an optional strainer for the EVO820, EVO810 and C8000. Its larger holes let more fibre and pulp into the juice than the standard fine strainer, which suits soft fruit such as banana, mango and berries. Kuvings sells it under one code on two pages: one for the EVO820/EVO810 and one for the C8000.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 3 Kuvings models: C8000, EVO810, EVO820.

Kuvings' Silicone Wings (SPARE-B-SERIES-WINGS) fit the rotation wiper of the B6000 and B8000 whole slow juicers; Kuvings Australia lists them in both models' spare-parts pages. They wipe pulp off the strainer as it turns. Replace them when they are torn or worn; Kuvings gives no set interval.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 2 Kuvings models: B6000, B8000.

Kuvings' CS600 / CS700 Juicing Screw (SPARE-CS-AUGER) is the replacement auger (screw/press) for the CS600 and CS700 commercial cold press juicers. Kuvings recommends replacing the screw if it is damaged and juicing suffers; it gives no set interval.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 2 Kuvings models: CS600, CS700.

Kuvings' Spare Parts Pack for the AUTO10 and AUTO10 Plus (SPARE-SSPPJ-AUTO) holds two sets of silicone wings for the rotation wiper and two silicone rings for the juicing strainer. Kuvings says a silicone part that isn't fully inserted can let juice flow out or reduce the juice you get.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 2 Kuvings models: AUTO10, AUTO10 Plus.

Kuvings' Commercial Juicer Silicone Wings (5000-00582A) are a pair of silicone wings for the commercial rotation wiper of the CS600 and CS700. They fit inside the wiper and keep the juice flowing. Replace them when they are torn or worn; Kuvings gives no set interval.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 2 Kuvings models: CS600, CS700.

Kuvings' Coarse Juice Strainer (CS600 and CS700) is an optional strainer for the CS600 and CS700 commercial juicers. Its larger holes let more fibre and pulp into the juice than the standard strainer, which suits soft fruit such as banana, mango and berries.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 2 Kuvings models: CS600, CS700.

Kuvings' CS600 / CS700 Silicone Plug (SPARE-CS-STRAINERSEAL) is the 40 mm upgraded silicone seal for the juice strainer of the CS600 and CS700 commercial juicers. The previous strainer takes a 35 mm plug (5000-00250A) instead, so check which strainer you have.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits 2 Kuvings models: CS600, CS700.

Kuvings' Silicone Wing (B3000), code 5000-0053A-3, fits the rotation wiper of the B3000 whole slow juicer and wipes pulp off the strainer as it turns. Replace it when it is torn or worn; Kuvings gives no set interval.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the B3000.

Kuvings' Silicone Wing (998SAS), code 5000-0053A-998, fits the rotation wiper of the Kuvings Silent Juicer 998SAS and wipes pulp off the strainer as it turns. Replace it when it is torn or worn; Kuvings gives no set interval.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the 998SAS.

Kuvings' AUTO8 Silicone Bowl Ring (AUTO8-BOWL-RING) is the silicone ring for the AUTO8 juicing bowl; Kuvings says it suits the AUTO8 bowl only. A ring that isn't sealing can let juice leak. Replace it when it is torn or stretched; Kuvings gives no set interval.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the AUTO8.

Kuvings' CS600 Spare Parts Pack (CS600-SPP1) holds two silicone wing sets for the commercial rotation wiper and two silicone seals for the juice strainer of the CS600. A version with two Premium Smart Caps is also sold. Kuvings gives no set interval; replace the wings and seals when they are torn or worn.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the CS600.

Kuvings' Juicing Screw (998SAS) is the auger for the Kuvings Silent Juicer 998SAS. It turns inside the strainer to crush and press the produce. Kuvings recommends replacing the screw if it is damaged and juicing suffers; it gives no set interval.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the 998SAS.

Kuvings' Strainer (998SAS) is the juice strainer for the Kuvings Silent Juicer 998SAS. It sits inside the rotation wiper, and the juicing screw turns inside it. Kuvings recommends replacing the strainer if it is damaged and juicing suffers; it gives no set interval.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the 998SAS.

Kuvings' Juicing Screw (AUTO10 Plus), code SPARE-AUTO10PLUS-AUGER, is the auger for the AUTO10 Plus hands-free juicer. It turns inside the strainer to crush and press the produce. Kuvings recommends replacing the screw if it is damaged and juicing suffers, and asks you to check your model number before ordering.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the AUTO10 Plus.

Kuvings' Juice Strainer (AUTO10PLUS), code SPARE-AUTO10PLUS-STRAINER, is the fine juice strainer for the AUTO10 Plus hands-free juicer. It fits inside the rotation wiper, and the juicing screw turns inside it. Kuvings recommends replacing the strainer if it is damaged and juicing suffers, and asks you to check your model number before ordering.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the AUTO10 Plus.

Kuvings' Juicing Screw (AUTO8), code SPARE-AUTO8-AUGER, is the auger for the AUTO8 hands-free juicer. It turns inside the strainer to crush and press the produce. Kuvings recommends replacing the screw if it is damaged and juicing suffers, and asks you to check your model number before ordering.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the AUTO8.

Kuvings' Juice Strainer (AUTO8), code SPARE-AUTO8-STRAINER, is the juice strainer for the AUTO8 hands-free juicer. It sits in the drum set under the auto hopper, and the juicing screw turns inside it. Kuvings recommends replacing the strainer if it is damaged and juicing suffers; it asks you to check your model number before ordering.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the AUTO8.

Kuvings' CS600 Juice Strainer Replacement (SPARE-CS600-STRAINER) is the juice strainer for the CS600 commercial cold press juicer. It has Kuvings' stronger heavy-duty seal (77/78 #4), and the pack includes two extra silicone seals. Kuvings calls it a consumption part with no warranty.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the CS600.

Kuvings' CS700 Juice Strainer Replacement (SPARE-CS700-STRAINER) is the juice strainer for the CS700 commercial cold press juicer. It has Kuvings' stronger heavy-duty seal (77/78 #4), and the pack includes two extra silicone seals. Kuvings calls it a consumption part with no warranty.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the CS700.

Kuvings' Juicing Screw (Cutting Auger), code SPARE-REVO-AUGER, is the auger for the REVO830; Kuvings says it fits all REVO830 models. It cuts and presses the produce inside the strainer. Kuvings recommends replacing the screw if it is damaged and juicing suffers; it gives no set interval.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the REVO830.

Kuvings' Juice Strainer (REVO830), code SPARE-REVO-STRAINER, is the fine juice strainer for the REVO830; Kuvings says it fits all REVO830 models. It sits inside the rotation wiper, and the cutting auger turns inside it. Kuvings recommends replacing the strainer if it is damaged and juicing suffers. A coarse strainer is sold separately.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the REVO830.

Kuvings' Spare Parts Pack for the REVO830 (SPARE-SSPPJ-REVO830) holds two sets of silicone wings for the rotation wiper and two silicone rings for the strainer. Kuvings says a ring that isn't firmly in place lets juice leak from the bottom of the bowl. It gives no set interval.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the REVO830.

Kuvings' Juicing Screw (AUTO10), code SPARE-AUTO10-AUGER-V3, is the auger for the AUTO10, model numbers AUTO10-BL, -WT, -RD and -SV. Kuvings asks owners of the AUTO10-BK or AUTO10-WH, or anyone unsure of their model, to contact its head office first. Kuvings recommends replacing the screw if it is damaged and juicing suffers.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the AUTO10.

Kuvings' Juice Strainer (AUTO10), code SPARE-AUTO10-STRAINER-V3, is the fine juice strainer for the AUTO10 hands-free juicer, model numbers AUTO10-BL, -WT, -RD and -SV. Kuvings asks owners of the AUTO10-BK or AUTO10-WH, or anyone unsure of their model, to contact its head office before ordering. It fits inside the rotation wiper with a silicone ring.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the AUTO10.

Kuvings' Coarse Juice Strainer for the AUTO10 (SPARE-AUTO10-COARSE-V2) is an optional strainer with larger holes for thicker, pulpier juice. Kuvings sells two versions under the same code: one for AUTO10 juicers with a seal in the strainer and one for early AUTO10s without. Check your current strainer, or ask Kuvings, before you order.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the AUTO10.

Kuvings' Coarse Juice Strainer (AUTO10PLUS) is an optional strainer for the AUTO10 Plus. Its larger holes let more fibre and pulp into the juice than the standard fine strainer, which suits soft fruit such as banana, mango and berries. Kuvings says it suits the AUTO10 Plus only.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the AUTO10 Plus.

Kuvings' Coarse Juice Strainer (REVO830) is an optional strainer for the REVO830. Its larger holes let more fibre and pulp into the juice than the standard fine strainer, which suits soft fruit such as banana, mango and berries. Kuvings says it suits the REVO830 only.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the REVO830.

Kuvings' Silicone Wings for the REVO830 (SPARE-REVO-WINGSET) fit the REVO830's rotation wiper and wipe pulp off the strainer as it turns. Replace them when they are torn or worn; Kuvings gives no set interval. The REVO830 spare parts pack has two wing sets and two strainer rings.

After the change: No reset: Kuvings juicers have no reminder for this part.

Fits the REVO830.