The Hurom CE50 takes the Hurom CP50 and CE50 extraction packing (HX513) as its silicone part; Australian sellers list it from A$9.50 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your cold press juicer
Hurom CE50
Cold press juicer
Confirmed against Hurom's listConfirmed against Hurom's own compatibility list
Not yours? Change
Takes the HX513 silicone part
CP50 and CE50 extraction packing (HX513) · check the code on your old part before ordering.
Your cold press juicer
Cold press juicer
Confirmed against Hurom's listConfirmed against Hurom's own compatibility list
Takes the HX513
Silicone part · check the code on your old part.
Other Hurom cold press juicers that take the HX513
GenuineGenuine Hurom
$9.50
Hurom Australia · 28 OctLowest genuine · Hurom Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Hurom. Compatible: another brand.Genuine is made by Hurom. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $9.50
Hurom Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Hurom Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is torn, stretched or juice leaks; Hurom gives no interval for this model (its H400 and H70 books call silicone packings consumables to replace every 6 to 12 months).
After replacing: No reset: Hurom juicers have no reminder for this part.
How to change the silicone part in your Hurom CE50
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Switch the juicer off and unplug it, then open the hopper and lift the chamber set off the body.
- 2Hold the old packing and pull it back to take it out.
- 3Insert one side of the new packing first, as if hooking it in, then press down the rest of the perimeter so nothing is folded.
- 4Check every packing is fitted the right way up before juicing: a packing fitted upside-down or only part way lets juice leak.
Every number this part goes by
- Retail name:
- HX513
Sellers list any of these; they are the same part.
About your Hurom CE50
Hurom juicer, cold press juicer — Commercial. Its silicone part is the CP50 and CE50 extraction packing (HX513), part HX513.
Where the model number is: The model is on the label under the motor base, and on the box. Unplug the juicer and take the bowl off before you turn the base over.
Common questions
- Which silicone part fits the Hurom CE50?
- The Hurom CE50 takes the Hurom CP50 and CE50 extraction packing (HX513).
- Where can I buy the HX513 in Australia?
- We track 1 Australian seller for the HX513; the lowest listed price when we last checked was A$9.50 at Hurom Australia. Prices are re-checked daily and dated on this page.
- How do I fit the HX513 in a Hurom CE50?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn or stretched seal or wiper lets juice leak round the bowl or the strainer.
- Is there anything to reset afterwards?
- No reset: Hurom juicers have no reminder for this part.
Something looks wrong with the CE50 match? . Reports go to a person, not a bot.