The Kuvings C8000 takes the Kuvings juice strainer for C and E series and EVO820 (SPARE-PRO-STRAINER) as its filter; Australian sellers list it from A$89.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your cold press juicer
Kuvings C8000
Cold press juicer
Confirmed against Kuvings's listConfirmed against Kuvings's own compatibility list
Not yours? Change
Takes the SPARE-PRO-STRAINER filter
juice strainer for C and E series and EVO820 (SPARE-PRO-STRAINER) · check the code printed on your old filter before ordering.
Your cold press juicer
Cold press juicer
Confirmed against Kuvings's listConfirmed against Kuvings's own compatibility list
Takes the SPARE-PRO-STRAINER
Filter · check the code on your old filter.
Other Kuvings cold press juicers that take the SPARE-PRO-STRAINER
GenuineGenuine Kuvings
$89.00
Kuvings Australia · 28 OctLowest genuine · Kuvings Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Kuvings. Compatible: another brand.Genuine is made by Kuvings. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $89.00
Kuvings Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Other parts this cold press juicer takes
- Kuvings spare parts pack: silicone wings and strainer rings (SPARE-SSPPJ)Open Kuvings Australia$9.98 each · 2-pack $19.95
The silicone part. Separate from the filter.
- Kuvings silicone ring for the juice strainer, flat or sunken (SPARE-PRO-STRAINERSEAL)Open Kuvings Australia$6.00
The silicone part. The strainer's silicone ring on its own: choose Flat 45 mm or Sunken 35 mm to match the base of your juicing bowl. Separate from the filter.
- Kuvings silicone wing set for C and E series and EVO820 (SPARE-PRO-WINGSET)Open Kuvings Australia$8.00
The silicone part. The silicone wings on their own (one set). Separate from the filter.
- Kuvings juicing screw for C and E series and EVO820 (SPARE-PRO-AUGER)Open Kuvings Australia$129.00
The auger. Separate from the filter.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Kuvings Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is damaged and juicing suffers; Kuvings says part life depends on how much and what you juice, and gives no set interval.
After replacing: No reset: Kuvings juicers have no reminder for this part.
How to change the filter in your Kuvings C8000
Watch the guide or follow the steps.
- 1Switch the juicer off and unplug it.
- 2Turn the drum lid anticlockwise to open it and lift the top-set off the body.
- 3Remove the juicing screw, then the strainer and rotation wiper unit from the juicing bowl.
- 4Fit the strainer into the rotation wiper and place them in the juicing bowl with the red dot on the strainer lined up with the red dot on the bowl.
- 5Put the juicing screw into the strainer, turn and press until it clicks, then refit the drum lid and turn it to close.
Every number this part goes by
- Retail name:
- SPARE-PRO-STRAINER
Sellers list any of these; they are the same part.
About your Kuvings C8000
Kuvings juicer, cold press juicer — C series. Its filter is the juice strainer for C and E series and EVO820 (SPARE-PRO-STRAINER), part SPARE-PRO-STRAINER.
Other filters the maker lists for this cold press juicer: Kuvings coarse juice strainer for EVO820, EVO810 and C8000 (SPARE-EVO-COARSE). Optional coarse strainer for thicker juice with more pulp (Kuvings sells it under the same code for the C8000).
Also in this cold press juicer:
- Kuvings spare parts pack: silicone wings and strainer rings (SPARE-SSPPJ), Kuvings juicing screw for C and E series and EVO820 (SPARE-PRO-AUGER).
- Kuvings silicone ring for the juice strainer, flat or sunken (SPARE-PRO-STRAINERSEAL). The strainer's silicone ring on its own: choose Flat 45 mm or Sunken 35 mm to match the base of your juicing bowl.
- Kuvings silicone wing set for C and E series and EVO820 (SPARE-PRO-WINGSET). The silicone wings on their own (one set).
Where the model number is: The model is on the label under the motor base, and on the box. Unplug the juicer and take the bowl off before you turn the base over.
Common questions
- Which filter fits the Kuvings C8000?
- The Kuvings C8000 takes the Kuvings juice strainer for C and E series and EVO820 (SPARE-PRO-STRAINER).
- Where can I buy the SPARE-PRO-STRAINER in Australia?
- We track 1 Australian seller for the SPARE-PRO-STRAINER; the lowest listed price when we last checked was A$89.00 at Kuvings Australia. Prices are re-checked daily and dated on this page.
- How do I fit the SPARE-PRO-STRAINER in a Kuvings C8000?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn or damaged filter, strainer or screw juices less and lets more pulp through into the juice.
- Is there anything to reset afterwards?
- No reset: Kuvings juicers have no reminder for this part.
Something looks wrong with the C8000 match? . Reports go to a person, not a bot.