The EGO LMX5300SP takes the EGO Commercial 53cm high-lift blade AB5301 as its blade; Australian sellers list it from A$47.95 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your lawn mower
EGO LMX5300SP
Lawn mower
Confirmed against EGO's listConfirmed against EGO's own compatibility list
Not yours? Change
Takes the AB5301 blade
Commercial 53cm high-lift blade AB5301 · check the code on your old part before ordering.
One 53 cm high-lift blade (AB5301). Blade bolt torque 50-60 Nm.
Your lawn mower
Lawn mower
Confirmed against EGO's listConfirmed against EGO's own compatibility list
Takes the AB5301
Blade · check the code on your old part.
One 53 cm high-lift blade (AB5301). Blade bolt torque 50-60 Nm.
Other EGO lawn mowers and their blades and parts
The AB5301 fits the LMX5300SP only. These EGO models take a different blade:
GenuineGenuine EGO
$47.95
EGO Australia · 28 OctLowest genuine · EGO Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by EGO. Compatible: another brand.Genuine is made by EGO. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $47.95
EGO Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens EGO Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is bent, worn or damaged, together with the blade bolt, EGO says; inspect both before each use, and sharpen or replace a dull blade.
After replacing: No reset needed.
How to change the blade in your EGO LMX5300SP
Watch the guide or follow the steps.
- 1Switch the mower off and remove the battery pack. Wear heavy gloves, or wrap the cutting edges, whenever you handle the blade.
- 2Turn the mower over and clear grass and debris from the deck, drive shaft and motor fan.
- 3Hold the blade still and undo the blade bolt. If the bolt turns with the shaft, line up the holes in the fan with the holes in the blade and put a metal rod through them.
- 4Fit the new blade with the fan side towards the deck and the printed side facing out, lining up the holes in the fan and blade.
- 5Tighten the blade bolt to 50-60 Nm.
Every number this part goes by
- Retail name:
- AB5301
Sellers list any of these; they are the same part.
About your EGO LMX5300SP
EGO lawn mower — Commercial 53cm. Its blade is the Commercial 53cm high-lift blade AB5301, part AB5301.
Where the model number is: The model is on the label on the mower's deck or handle. Disconnect the spark plug lead, or take the battery or safety key out, before you tip the mower: the blade is sharp.
Fits this EGO model
EGO1 model
One 53 cm high-lift blade (AB5301). Blade bolt torque 50-60 Nm.
Common questions
- Which blade fits the EGO LMX5300SP?
- The EGO LMX5300SP takes the EGO Commercial 53cm high-lift blade AB5301. One 53 cm high-lift blade (AB5301). Blade bolt torque 50-60 Nm.
- Where can I buy the AB5301 in Australia?
- We track 1 Australian seller for the AB5301; the lowest listed price when we last checked was A$47.95 at EGO Australia. Prices are re-checked daily and dated on this page.
- How do I fit the AB5301 in an EGO LMX5300SP?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.
- Is there anything to reset afterwards?
- No reset needed.
Something looks wrong with the LMX5300SP match? . Reports go to a person, not a bot.