FitMatch

The EGO LMX7600SP takes the EGO 38cm high lift blade AB3000 for the 76cm Commercial mower as its blade; Australian sellers list it from A$47.95 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

EGO LMX7600SP

Your lawn mower

Lawn mower

Confirmed against EGO's list

Not yours? Change
AB3000

Takes the AB3000

Blade · check the code on your old part.

Takes two AB3000 high-lift blades, so buy two: EGO sells them one at a time. Blade bolt torque 50-60 N·m.

Other EGO lawn mowers and their blades and parts

The AB3000 fits the LMX7600SP only. These EGO models take a different blade:

Genuine

$47.95

EGO Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by EGO. Compatible: another brand.

Lowest price · $47.95

EGO Australia. Every seller we track is listed below. Some links earn us a commission.

Open EGO Australia

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

EGO AustraliaGenuine · checked 28 Oct$47.95Open
Open cheapest seller · $47.95

Opens EGO Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is bent, worn or damaged, together with the blade bolt, EGO says; inspect both before each use, and sharpen or replace a dull blade.

After replacing: No reset needed.

How to change the blade in your EGO LMX7600SP

Watch the guide or follow the steps.

EGO Mower Blade Changing and Sharpening · EGO POWER+ (official)
  1. 1Switch the mower off and remove the battery pack. Wear heavy gloves, or wrap the cutting edges, whenever you handle the blade.
  2. 2Turn the mower over and clear grass and debris from the deck, drive shaft and motor fan.
  3. 3Hold the blade still and undo the blade bolt. If the bolt turns with the shaft, line up the holes in the fan with the holes in the blade and put a metal rod through them.
  4. 4Fit the new blade with the fan side towards the deck and the printed side facing out, lining up the holes in the fan and blade. The 76cm mower has two blades: change both.
  5. 5Tighten each blade bolt to 50-60 Nm with a torque wrench.
Every number this part goes by
Retail name:
AB3000

Sellers list any of these; they are the same part.

About your LMX7600SP

EGO lawn mower — Commercial 76cm. Its blade is the 38cm high lift blade AB3000 for the 76cm Commercial mower, part AB3000.

Other blades the maker lists for this lawn mower: EGO 38cm mulching blade AB3001 for the 76cm Commercial mower. EGO's AB3001 mulching blade is the alternative; the mower takes two.

Where the model number is: The model is on the label on the mower's deck or handle. Disconnect the spark plug lead, or take the battery or safety key out, before you tip the mower: the blade is sharp.

Fits this EGO model

EGO1 model

Takes two AB3000 high-lift blades, so buy two: EGO sells them one at a time. Blade bolt torque 50-60 N·m.

Common questions
Which blade fits the EGO LMX7600SP?
The EGO LMX7600SP takes the EGO 38cm high lift blade AB3000 for the 76cm Commercial mower. Takes two AB3000 high-lift blades, so buy two: EGO sells them one at a time. Blade bolt torque 50-60 N·m.
Where can I buy the AB3000 in Australia?
We track 1 Australian seller for the AB3000; the lowest listed price when we last checked was A$47.95 at EGO Australia. Prices are re-checked daily and dated on this page.
How do I fit the AB3000 in an EGO LMX7600SP?
5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.
Is there anything to reset afterwards?
No reset needed.

Something looks wrong with the LMX7600SP match? . Reports go to a person, not a bot.