FitMatch

Masport lawn mower blades

Which blade (and on petrol mowers, which air filter and spark plug) each of the 15 Masport lawn mowers sold in Australia takes, with dated prices from 4 Australian sellers, genuine and compatible side by side.

Showing 15 of 15 Masport models

How to change the blade in your Masport mower

Steps for the Quick Cut 485mm blade and bolt set 783310 (4 blades) (783310), the blade 4 Masport models take.

Masport Lawnmowers: Blade Systems · Masport (official)
  1. 1Stop the engine and wait for the blade to stop, then remove the spark plug lead and keep it away from the plug. Wear protective gloves.
  2. 2Drain the fuel, then tilt the mower with the spark plug uppermost, as the engine book says.
  3. 3Undo the blade centre bolt and take the blade carrier (disc) off the mower, noting where each part goes.
  4. 4Undo the tip mounting bolts and fit the new blades with the new bolts, washers and nuts from the set. Replace all the blades on the carrier together.
  5. 5Refit the carrier so its slots sit over the lugs and the drive plate; replace the mounting bolts if they are worn. Tighten the tip bolts to 20-25 Nm and the centre bolt to 45-50 Nm.

Different steps for 485mm flat-disc blade and bolt set 773702 (2 blades) · Different steps for 485mm swing-back blade set 765155 (2 blades, 60V)

After changing the blade

No reset needed.

Common questions

What happens if I don't change the blade?
A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.
Does Masport make a compatible blade?
Masport makes the genuine blade. Compatible blades for Masport models are made by other companies to fit the same models, and Australian sellers we track list both; each part page shows the genuine and compatible prices side by side.
Is there anything to reset after changing the blade on a Masport mower?
No reset needed.
All 15 Masport lawn mowers we list, A to Z

Brand names describe compatibility only; FitMatch is independent of Masport. Fitment sources are recorded on every model page.