The Masport 700 ST S19 2'n1 SP InStart takes the Masport Quick Cut 485mm blade and bolt set 783310 (4 blades) as its blade; Australian sellers list it from A$25.50 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your lawn mower
Masport 700 ST S19 2'n1 SP InStart
Lawn mower
Confirmed against Masport's listConfirmed against Masport's own compatibility list
Not yours? Change
Takes the 783310 blade
Quick Cut 485mm blade and bolt set 783310 (4 blades) · check the code on your old part before ordering.
Takes 4 blades on its 485 mm wavy disc: one set of 783310 (4 blades with bolts) does the job.
Your lawn mower
Lawn mower
Confirmed against Masport's listConfirmed against Masport's own compatibility list
Takes the 783310
Blade · check the code on your old part.
Takes 4 blades on its 485 mm wavy disc: one set of 783310 (4 blades with bolts) does the job.
Other Masport lawn mowers that take the 783310
GenuineGenuine Masport
$31.90
Power Mowers · 31 OctLowest genuine · Power Mowers · checked 31 Oct
CompatibleCompatible option
$25.50
Mower Merch · 28 OctMower Merch · checked 28 Oct
Check sellerCheck seller details
Genuine: made by Masport. Compatible: another brand.Genuine is made by Masport. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $25.50
Mower Merch. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 5 listings from 4 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
4 listings from 3 sellers
Opens Mower Merch in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when the blades or bolts are worn or damaged, in sets so the cutter stays balanced, Masport says; check them before each use and whenever the mower hits something or starts to vibrate.
After replacing: No reset needed.
How to change the blade in your Masport 700 ST S19 2'n1 SP InStart
Watch the guide or follow the steps.
- 1Stop the engine and wait for the blade to stop, then remove the spark plug lead and keep it away from the plug. Wear protective gloves.
- 2Drain the fuel, then tilt the mower with the spark plug uppermost, as the engine book says.
- 3Undo the blade centre bolt and take the blade carrier (disc) off the mower, noting where each part goes.
- 4Undo the tip mounting bolts and fit the new blades with the new bolts, washers and nuts from the set. Replace all the blades on the carrier together.
- 5Refit the carrier so its slots sit over the lugs and the drive plate; replace the mounting bolts if they are worn. Tighten the tip bolts to 20-25 Nm and the centre bolt to 45-50 Nm.
Every number this part goes by
- Retail name:
- 783310
Sellers list any of these; they are the same part.
About your Masport 700 ST S19 2'n1 SP InStart
Masport lawn mower — Series 19 (485 mm Quick Cut). Its blade is the Quick Cut 485mm blade and bolt set 783310 (4 blades), part 783310.
Where the model number is: The model is on the label on the mower's deck or handle. Disconnect the spark plug lead, or take the battery or safety key out, before you tip the mower: the blade is sharp.
Fits these 4 Masport models
700 ST S19 2'n1. Takes 4 blades on its 485 mm wavy disc: one set of 783310 (4 blades with bolts) does the job. Masport lists the same set for both versions (567797 and 565772).
The other 3 models. Takes 4 blades on its 485 mm wavy disc: one set of 783310 (4 blades with bolts) does the job.
Common questions
- Which blade fits the Masport 700 ST S19 2'n1 SP InStart?
- The Masport 700 ST S19 2'n1 SP InStart takes the Masport Quick Cut 485mm blade and bolt set 783310 (4 blades). Takes 4 blades on its 485 mm wavy disc: one set of 783310 (4 blades with bolts) does the job.
- Where can I buy the 783310 in Australia?
- We track 4 Australian sellers for the 783310; the lowest listed price when we last checked was A$25.50 at Mower Merch. Prices are re-checked daily and dated on this page.
- How do I fit the 783310 in a Masport 700 ST S19 2'n1 SP InStart?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.
- Is there anything to reset afterwards?
- No reset needed.
Something looks wrong with the 700 ST S19 2'n1 SP InStart match? . Reports go to a person, not a bot.