The Beatbot Sora 30 takes the Beatbot ultra-fine filter basket for Sora 30 (FBDMA021-G) as its filter; Australian sellers list it from A$99.99 as of 31 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your pool cleaner
Beatbot Sora 30
Pool cleaner
Confirmed against Beatbot's listConfirmed against Beatbot's own compatibility list
Not yours? Change
Takes the FBDMA021-G filter
ultra-fine filter basket for Sora 30 (FBDMA021-G) · check the code printed on your old filter before ordering.
Optional ultra-fine basket for fine dust and algae. The robot comes with a standard basket, which Beatbot does not sell on its own; Beatbot says to start with the standard basket and switch once large debris is gone.
Your pool cleaner
Pool cleaner
Confirmed against Beatbot's listConfirmed against Beatbot's own compatibility list
Takes the FBDMA021-G
Filter · check the code on your old filter.
Optional ultra-fine basket for fine dust and algae. The robot comes with a standard basket, which Beatbot does not sell on its own; Beatbot says to start with the standard basket and switch once large debris is gone.
Other Beatbot pool cleaners and their filters
The FBDMA021-G fits the Sora 30 only. These Beatbot models take a different filter:
GenuineGenuine Beatbot
$99.99
Beatbot Australia · 31 OctLowest genuine · Beatbot Australia · checked 31 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Beatbot. Compatible: another brand.Genuine is made by Beatbot. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $99.99
Beatbot Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Beatbot Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it after about 40 cleaning cycles (150 hours), or sooner if the fabric stays grey or hard after washing or suction drops, Beatbot says.
After replacing: No reset needed.
How to change the filter in your Beatbot Sora 30
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Take the robot out of the pool and switch it off.
- 2Lift out the standard basket by its handle.
- 3Fold up the handle of the ultra-fine basket and drop it in where the standard basket was.
- 4Close the robot. Beatbot says to use the standard basket first to clear large debris, then switch to the ultra-fine basket.
Every number this part goes by
- Retail name:
- FBDMA021
- Retail name:
- FBDMA021-G
Sellers list any of these; they are the same part.
About your Beatbot Sora 30
Beatbot pool cleaner — Sora. Its filter is the ultra-fine filter basket for Sora 30 (FBDMA021-G), part FBDMA021-G.
Where the model number is: On a robot the model is on the label on the cleaner's body, often underneath, or on its power supply; unplug the power supply and lift the robot out of the pool before you turn it over. On a Polaris pressure cleaner it is on the body and the box.
Fits this Beatbot model
Beatbot1 model
Optional ultra-fine basket for fine dust and algae. The robot comes with a standard basket, which Beatbot does not sell on its own; Beatbot says to start with the standard basket and switch once large debris is gone.
Common questions
- Which filter fits the Beatbot Sora 30?
- The Beatbot Sora 30 takes the Beatbot ultra-fine filter basket for Sora 30 (FBDMA021-G). Optional ultra-fine basket for fine dust and algae. The robot comes with a standard basket, which Beatbot does not sell on its own; Beatbot says to start with the standard basket and switch once large debris is gone.
- Where can I buy the FBDMA021-G in Australia?
- We track 1 Australian seller for the FBDMA021-G; the lowest listed price when we last checked was A$99.99 at Beatbot Australia. Prices are re-checked daily and dated on this page.
- How do I fit the FBDMA021-G in a Beatbot Sora 30?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A clogged filter slows the cleaner and it picks up less; a torn one lets fine dirt pass straight back into the water.
- Is there anything to reset afterwards?
- No reset needed.
Something looks wrong with the Sora 30 match? . Reports go to a person, not a bot.