The Maytronics Dolphin Supreme M4 takes the Dolphin single-drive combined brush, grey (1 piece) (part 6101641) as its brush; replace it every 12 months; Australian sellers list it from A$39.99 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your pool cleaner
Maytronics Dolphin Supreme M4
Pool cleaner
Confirmed against Maytronics's listConfirmed against Maytronics's own compatibility list
Not yours? ChangeSave it · remind me every 12 months
Takes the 6101641 brush
Dolphin single-drive combined brush, grey (1 piece) · replace every 12 months · check the code on your old part before ordering.
Takes 2 brushes.
Your pool cleaner
Pool cleaner
Confirmed against Maytronics's listConfirmed against Maytronics's own compatibility list
Takes the 6101641
Brush · every 12 months · check the code on your old part.
Takes 2 brushes.
Other Maytronics pool cleaners that take the 6101641
GenuineGenuine Maytronics
$39.99
Maytronics Australia · 28 OctLowest genuine · Maytronics Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Maytronics. Compatible: another brand.Genuine is made by Maytronics. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $39.99
Maytronics Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Maytronics Australia in a new tab. Their page is the source of truth for price, delivery and returns.
Not due yet?
Get a nudge when your brush is due — it's every 12 months. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the brush in your Maytronics Dolphin Supreme M4
Watch the guide or follow the steps.
- 1Turn the robot off at the power supply and unplug the cable. Take the robot out of the pool, let it drain and lay it upside down on a flat, clean surface.
- 2Grip the old brush firmly at one end and pull it away from the roller until it slides off.
- 3Line the new brush up with the roller grooves and push it on, starting at one end and working across.
- 4Check the brush is centred with no loose ends or gaps, then spin the roller by hand to make sure it moves freely.
- 5Replace every brush the model takes (2 or 4), then run a short cycle to check the robot grips and climbs.
Every number this part goes by
- Retail name:
- 6101641
- Retail name:
- 6101641-R2
Sellers list any of these; they are the same part.
About your Maytronics Dolphin Supreme M4
Maytronics pool cleaner — Dolphin Supreme (M Line). Its brush is the Dolphin single-drive combined brush, grey (1 piece), part 6101641, changed every 12 months.
Other brushes the maker lists for this pool cleaner: Dolphin single wonder brush (1 piece) (every 12 months). Wonder brush: for smooth surfaces such as polished concrete, tiles, smooth render and fibreglass. 2 are needed.
Where the model number is: On a robot the model is on the label on the cleaner's body, often underneath, or on its power supply; unplug the power supply and lift the robot out of the pool before you turn it over. On a Polaris pressure cleaner it is on the body and the box.
Fits these 2 Maytronics models
Maytronics2 models
Takes 2 brushes.
Common questions
- Which brush fits the Maytronics Dolphin Supreme M4?
- The Maytronics Dolphin Supreme M4 takes the Dolphin single-drive combined brush, grey (1 piece) (part 6101641). Takes 2 brushes.
- How often should I replace the brush in my Maytronics Dolphin Supreme M4?
- Every 12 months, or sooner if it looks worn.
- Where can I buy the 6101641 in Australia?
- We track 1 Australian seller for the 6101641; the lowest listed price when we last checked was A$39.99 at Maytronics Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 6101641 in a Maytronics Dolphin Supreme M4?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A clogged filter slows the cleaner and it picks up less; a torn one lets fine dirt pass straight back into the water.
- Is there anything to reset afterwards?
- No reset needed.
Something looks wrong with the Dolphin Supreme M4 match? . Reports go to a person, not a bot.