The Zodiac FreeRider FR200 takes the Zodiac FreeRider FR200 filter canister assembly 150 micron R1066200 as its filter; Australian sellers list it from A$72.00 as of 31 October 2026. This fit is not yet confirmed against the manufacturer's list.
Your pool cleaner
Zodiac FreeRider FR200
Pool cleaner
Not confirmed by Zodiac — check your old filterNot yet confirmed by Zodiac's own list — check the code on your old filter
Not yours? Change
Takes the R1066200 filter
FreeRider FR200 filter canister assembly 150 micron R1066200 · check the code printed on your old filter before ordering.
Single 150 micron canister, Zodiac says.
Your pool cleaner
Pool cleaner
Not confirmed by Zodiac — check your old filterNot yet confirmed by Zodiac's own list — check the code on your old filter
Takes the R1066200
Filter · check the code on your old filter.
Single 150 micron canister, Zodiac says.
Other Zodiac pool cleaners and their filters
The R1066200 fits the FreeRider FR200 only. These Zodiac models take a different filter:
GenuineGenuine Zodiac
$72.00
Pool & Spa Warehouse · 31 OctLowest genuine · Pool & Spa Warehouse · checked 31 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Zodiac. Compatible: another brand.Genuine is made by Zodiac. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $72.00
Pool & Spa Warehouse. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Pool & Spa Warehouse in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when the canister mesh has rips or tears, Zodiac says; empty and rinse it after every cycle and wash it now and then with soapy water and a soft brush.
After replacing: No reset needed. Robots with a filter-full light on the control box or in the iAquaLink app clear it after the canister is emptied and a new cycle starts.
How to change the filter in your Zodiac FreeRider FR200
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Take the cordless robot out of the pool and let the water drain. Unplug the charger before cleaning or maintenance.
- 2Push the cover lock and lift the cover until it stays upright (on the FR200, press down on the top of the lid and lift it).
- 3Lift out the filter canister assembly.
- 4Fit the new canister (on the FR800, the 60 micron fine filter and the 150 micron canister go together) and put the assembly back.
- 5Close the cover until it clicks.
Every number this part goes by
- Retail name:
- R1066200
Sellers list any of these; they are the same part.
About your Zodiac FreeRider FR200
Zodiac pool cleaner — FreeRider (cordless). Its filter is the FreeRider FR200 filter canister assembly 150 micron R1066200, part R1066200.
Where the model number is: On a robot the model is on the label on the cleaner's body, often underneath, or on its power supply; unplug the power supply and lift the robot out of the pool before you turn it over. On a Polaris pressure cleaner it is on the body and the box.
Fits this Zodiac model
Zodiac1 model
Single 150 micron canister, Zodiac says.
Common questions
- Which filter fits the Zodiac FreeRider FR200?
- The Zodiac FreeRider FR200 takes the Zodiac FreeRider FR200 filter canister assembly 150 micron R1066200. Single 150 micron canister, Zodiac says.
- Where can I buy the R1066200 in Australia?
- We track 1 Australian seller for the R1066200; the lowest listed price when we last checked was A$72.00 at Pool & Spa Warehouse. Prices are re-checked daily and dated on this page.
- How do I fit the R1066200 in a Zodiac FreeRider FR200?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A clogged filter slows the cleaner and it picks up less; a torn one lets fine dirt pass straight back into the water.
- Is there anything to reset afterwards?
- No reset needed. Robots with a filter-full light on the control box or in the iAquaLink app clear it after the canister is emptied and a new cycle starts.
Something looks wrong with the FreeRider FR200 match? . Reports go to a person, not a bot.