Pool filter cartridge
Hayward SwimClear C150S cartridge element CX150XRE
CX150XRE
Fits 1 model
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Hayward
See seller
No genuine seller tracked yetNo genuine seller tracked yet
CompatibleCompatible option
$147.00
Heater and Spa Parts · 28 OctHeater and Spa Parts · checked 28 Oct
Check sellerCheck seller details
Genuine: made by Hayward. Compatible: another brand.Genuine is made by Hayward. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $147.00
Heater and Spa Parts. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 3 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
3 sellers
Opens Heater and Spa Parts in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when cleaning no longer brings the pressure down; clean it when the pressure rises 0.5–0.7 bar (7–10 psi) above the starting pressure.
After replacing: No reset light. Hayward says to clean or replace the cartridge when the gauge rises 7–10 psi (0.5–0.7 bar) above the starting pressure.
How to change the CX150XRE pool filter cartridge
Watch the guide or follow the steps.
- 1Shut off the pump. If the filter is below water level, close the valves.
- 2Take out the drain plug and open the manual air relief valve to drain the filter.
- 3Press the safety latch and unscrew the lock ring anticlockwise. Lift off the filter head with the ring.
- 4Lift the cartridge out. Hose it inside and out (do not pressure wash), or fit a new one.
- 5Sit the cartridge evenly on the hub in the base, refit the head with its O-ring and tighten the lock ring until the safety latch engages.
Every number this part goes by
- Retail name:
- C-9441
- Retail name:
- CX150XRE
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits this Hayward model
Hayward1 model
Common questions
- What does the CX150XRE fit?
- The Hayward SwimClear C150S cartridge element CX150XRE fits the Hayward C150S.
- Where can I buy the CX150XRE in Australia?
- We track 3 Australian sellers for the CX150XRE; the lowest listed price when we last checked was A$147.00 at Heater and Spa Parts. Prices are re-checked daily and dated on this page.
- How do I fit the CX150XRE?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A clogged cartridge slows the flow and the pump works harder, and a torn one lets dirt back into the water, so the pool or spa clouds.
- Is there anything to reset afterwards?
- No reset light. Hayward says to clean or replace the cartridge when the gauge rises 7–10 psi (0.5–0.7 bar) above the starting pressure.
Something looks wrong with the CX150XRE match? . Reports go to a person, not a bot.