The Poolrite CL150 takes the Poolrite C Series CL150 cartridge element 11080033 as its cartridge; Australian sellers list it from A$284.00 as of 6 November 2026. Fitment confirmed against the manufacturer's compatibility list.
Your pool filter
Poolrite CL150
Pool filter
Confirmed against Poolrite's listConfirmed against Poolrite's own compatibility list
Not yours? Change
Takes the 11080033 cartridge
C Series CL150 cartridge element 11080033 · check the code on your old part before ordering.
Current C Series (285 mm body). Older low-profile Poolrite CL filters may take a different size: check the length.
Your pool filter
Pool filter
Confirmed against Poolrite's listConfirmed against Poolrite's own compatibility list
Takes the 11080033
Cartridge · check the code on your old part.
Current C Series (285 mm body). Older low-profile Poolrite CL filters may take a different size: check the length.
Other Poolrite pool filters and their cartridges
The 11080033 fits the CL150 only. These Poolrite models take a different cartridge:
GenuineGenuine Poolrite
$284.00
Poolrite · 6 NovLowest genuine · Poolrite · checked 6 Nov
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Poolrite. Compatible: another brand.Genuine is made by Poolrite. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $284.00
Poolrite. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Genuine Poolrite
1 seller
Opens Poolrite in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is worn or damaged; clean it at 40–60 kPa above the clean-filter pressure.
After replacing: No reset light. Poolrite says to clean the cartridge when the gauge reads about 40–60 kPa above the clean-filter pressure.
How to change the cartridge in your Poolrite CL150
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Turn the pump off and close the valves. Open the air release valve on the lid.
- 2Undo the quick-access locking ring and lift the lid off.
- 3Lift out the cartridge. Hose it clean or soak it in cartridge cleaner; do not use a high-pressure hose or a stiff brush.
- 4Refit the cartridge, check the lid O-ring and tighten the locking ring. Restart and bleed the air.
Every number this part goes by
- Retail name:
- 11080033
Sellers list any of these; they are the same part.
About your Poolrite CL150
Poolrite pool filter — C Series cartridge filter. Its cartridge is the C Series CL150 cartridge element 11080033, part 11080033.
Where the model number is: The model is on the label on the filter tank or under the lid (Zodiac CS150, Hayward C150S). On an above-ground pump it is on the pump's label or the box (Intex model 604 or item 28604, Bestway 58383); on an inflatable spa, on the box or the pump unit's label (Lay-Z-Spa Miami, Intex SB-H20). If the label has worn off, measure the old cartridge's length and diameter.
Fits this Poolrite model
Poolrite1 model
Current C Series (285 mm body). Older low-profile Poolrite CL filters may take a different size: check the length.
Common questions
- Which cartridge fits the Poolrite CL150?
- The Poolrite CL150 takes the Poolrite C Series CL150 cartridge element 11080033. Current C Series (285 mm body). Older low-profile Poolrite CL filters may take a different size: check the length.
- Where can I buy the 11080033 in Australia?
- We track 1 Australian seller for the 11080033; the lowest listed price when we last checked was A$284.00 at Poolrite. Prices are re-checked daily and dated on this page.
- How do I fit the 11080033 in a Poolrite CL150?
- 4 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A clogged cartridge slows the flow and the pump works harder, and a torn one lets dirt back into the water, so the pool or spa clouds.
- Is there anything to reset afterwards?
- No reset light. Poolrite says to clean the cartridge when the gauge reads about 40–60 kPa above the clean-filter pressure.
Something looks wrong with the CL150 match? . Reports go to a person, not a bot.