The Bosch DWB97DN30A takes the Bosch / Neff metal grease filter 11067140 (268.5 x 398.5 x 8 mm) as its grease filter; Australian sellers list it from A$50.27 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your rangehood
Bosch DWB97DN30A
Rangehood
Confirmed against Bosch's listConfirmed against Bosch's own compatibility list
Not yours? ChangeTakes the 11067140 grease filter
metal grease filter 11067140 (268.5 x 398.5 x 8 mm) · check the code printed on your old filter before ordering.
Your rangehood
Rangehood
Confirmed against Bosch's listConfirmed against Bosch's own compatibility list
Takes the 11067140
Grease filter · check the code on your old filter.
Other Bosch rangehoods that take the 11067140
GenuineGenuine Bosch
$50.27
NEFF Australia · 26 OctLowest genuine · NEFF Australia · checked 26 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Bosch. Compatible: another brand.Genuine is made by Bosch. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $50.27
NEFF Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Opens NEFF Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it only if it is damaged; clean it about every two months.
After replacing: Hoods with a saturation indicator remind you to clean the grease filters. After cleaning, reset it: on many models switch the hood off, then press and hold the indicator button for about three seconds (see "Resetting the saturation indicator" in your manual).
How to change the grease filter in your Bosch DWB97DN30A
Watch the guide or follow the steps.
- 1Switch the hood off and let it cool. Integrated design hoods (DBB, LJ, D99X): open the glass front fully. Slide-outs (DFS, DFM): pull the visor out. DLN hoods: pull the filter cover down slowly.
- 2Hold the grease filter from below with one hand so it cannot drop onto the cooktop, open the lock and tilt it down, then lift it out of its holders. Keep it level so grease does not drip.
- 3Soak it in hot soapy water and brush it clean, or put it loosely in the dishwasher on a programme of no more than 70 °C. Do not squeeze it.
- 4Rinse and let it drain. Light discolouration after the dishwasher is normal.
- 5Hook the filter back into its holders, fold it up and check the lock clicks. If it is torn or bent, fit a new one the same way. Reset the saturation indicator if your hood has one.
Every number this part goes by
- Retail name:
- 11067140
Sellers list any of these; they are the same part.
About your Bosch DWB97DN30A
Bosch rangehood — Series 6 Wall-mounted canopy rangehood 90 cm. Its grease filter is the metal grease filter 11067140 (268.5 x 398.5 x 8 mm), part 11067140.
Where the model number is: Take out a grease filter: the rating plate with the model number is on the inside wall of the hood or on the fan housing. It is also in the manual and on the receipt.
Fits these 4 models
Bosch3 models
Neff1 model
Common questions
- Which grease filter fits the Bosch DWB97DN30A?
- The Bosch DWB97DN30A takes the Bosch / Neff metal grease filter 11067140 (268.5 x 398.5 x 8 mm).
- Where can I buy the 11067140 in Australia?
- We track 2 Australian sellers for the 11067140; the lowest listed price when we last checked was A$50.27 at NEFF Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 11067140 in a Bosch DWB97DN30A?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Grease builds up in the mesh and the fan pulls less air, so smoke and smells linger; a recirculating hood with a spent carbon filter blows the smell back into the kitchen.
- How do I reset the filter light?
- Hoods with a saturation indicator remind you to clean the grease filters. After cleaning, reset it: on many models switch the hood off, then press and hold the indicator button for about three seconds (see "Resetting the saturation indicator" in your manual).
Something looks wrong with the DWB97DN30A match? . Reports go to a person, not a bot.