The Electrolux ERI512SE takes the Aluminium grease filter, 52 cm hoods (4055941332) as its grease filter; Australian sellers list it from A$46.99 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your rangehood
Electrolux ERI512SE
Rangehood
Confirmed against Electrolux's listConfirmed against Electrolux's own compatibility list
Not yours? ChangeTakes the 4055941332 grease filter
Aluminium grease filter, 52 cm hoods (4055941332) · check the code printed on your old filter before ordering.
Your rangehood
Rangehood
Confirmed against Electrolux's listConfirmed against Electrolux's own compatibility list
Takes the 4055941332
Grease filter · check the code on your old filter.
Other Electrolux rangehoods and their grease and carbon filters
The 4055941332 fits the ERI512SE and 2 other models. These Electrolux models take a different grease filter:
GenuineGenuine Westinghouse
$46.99
Westinghouse Australia · 26 OctLowest genuine · Westinghouse Australia · checked 26 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Westinghouse. Compatible: another brand.Genuine is made by Westinghouse. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $46.99
Westinghouse Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Opens Westinghouse Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is damaged, or every 1–2 years as the maker's care guide suggests; clean it at least once a month, by hand or in the dishwasher on a low-temperature short cycle.
After replacing: Most hoods this part fits have no filter reminder. If yours has a filter light, the manual for your model explains the reset.
How to change the grease filter in your Electrolux ERI512SE
Watch the guide or follow the steps.
- 1Switch the rangehood off at the wall and let it cool.
- 2Pull the tab on the filter to release it and take it out of the hood.
- 3Soak for about 10 minutes in warm water with dishwashing liquid or baking soda, then scrub, or wash it in the dishwasher on a hot cycle.
- 4Let it dry completely, then fit it back into the hood. To replace it, fit the new filter the same way.
Every number this part goes by
- Retail name:
- 4055941332
Sellers list any of these; they are the same part.
About your Electrolux ERI512SE
Electrolux rangehood — Integrated. Its grease filter is the Aluminium grease filter, 52 cm hoods (4055941332), part 4055941332.
Other grease filters the maker lists for this rangehood: Aluminium grease filter, 86 cm hoods (4055941324). The maker lists both grease filters 4055941332 and 4055941324 for this model. Check the size or the code on the filter you are replacing.
Where the model number is: Take out a grease filter: the rating plate with the model number is on the inside wall of the hood or on the fan housing. It is also in the manual and on the receipt.
Common questions
- Which grease filter fits the Electrolux ERI512SE?
- The Electrolux ERI512SE takes the Aluminium grease filter, 52 cm hoods (4055941332).
- Where can I buy the 4055941332 in Australia?
- We track 2 Australian sellers for the 4055941332; the lowest listed price when we last checked was A$46.99 at Westinghouse Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 4055941332 in an Electrolux ERI512SE?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Grease builds up in the mesh and the fan pulls less air, so smoke and smells linger; a recirculating hood with a spent carbon filter blows the smell back into the kitchen.
- How do I reset the filter light?
- Most hoods this part fits have no filter reminder. If yours has a filter light, the manual for your model explains the reset.
Something looks wrong with the ERI512SE match? . Reports go to a person, not a bot.