The Fisher & Paykel HC60PCIEX3 takes the Fisher & Paykel filter 790682 as its grease filter; Australian sellers list it from A$54.95 as of 5 November 2026. Fitment confirmed against the manufacturer's compatibility list.
Your rangehood
Fisher & Paykel HC60PCIEX3
Rangehood
Confirmed against Fisher & Paykel's listConfirmed against Fisher & Paykel's own compatibility list
Not yours? Change
Takes the 790682 grease filter
filter 790682 · check the code printed on your old filter before ordering.
Your rangehood
Rangehood
Confirmed against Fisher & Paykel's listConfirmed against Fisher & Paykel's own compatibility list
Takes the 790682
Grease filter · check the code on your old filter.
Other Fisher & Paykel rangehoods that take the 790682
GenuineGenuine Fisher & Paykel
$54.95
Fisher & Paykel Australia · 5 NovLowest genuine · Fisher & Paykel Australia · checked 5 Nov
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Fisher & Paykel. Compatible: another brand.Genuine is made by Fisher & Paykel. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $54.95
Fisher & Paykel Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Genuine Fisher & Paykel
1 seller
Opens Fisher & Paykel Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it only if it is damaged; clean it at least once a month in hot soapy water or the dishwasher.
After replacing: Hoods with a filter cleaning light (HC*DCXB4 and others): the light comes on when the filters need cleaning; press it once to reset after cleaning.
How to change the grease filter in your Fisher & Paykel HC60PCIEX3
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Turn the rangehood off. Integrated (HP) models: open the perimeter plate first.
- 2Pull the catch and tilt the filter down until it is vertical, then lift it to unhook it from the supports.
- 3Wash it in hot soapy water or in the dishwasher; let it dry.
- 4Hook the filter into the slots at the rear and lift it until the clips engage (HP models: push it back into place and close the plate). If it is damaged, fit a new one.
- 5If the filter cleaning light is on, press it once to reset.
Every number this part goes by
- Retail name:
- 790682
Sellers list any of these; they are the same part.
About your Fisher & Paykel HC60PCIEX3
Fisher & Paykel rangehood. Its grease filter is the filter 790682, part 790682.
Where the model number is: Take out a grease filter: the rating plate with the model number is on the inside wall of the hood or on the fan housing. It is also in the manual and on the receipt.
Fits these 4 Fisher & Paykel models
Fisher & Paykel4 models
Common questions
- Which grease filter fits the Fisher & Paykel HC60PCIEX3?
- The Fisher & Paykel HC60PCIEX3 takes the Fisher & Paykel filter 790682.
- Where can I buy the 790682 in Australia?
- We track 1 Australian seller for the 790682; the lowest listed price when we last checked was A$54.95 at Fisher & Paykel Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 790682 in a Fisher & Paykel HC60PCIEX3?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Grease builds up in the mesh and the fan pulls less air, so smoke and smells linger; a recirculating hood with a spent carbon filter blows the smell back into the kitchen.
- How do I reset the filter light?
- Hoods with a filter cleaning light (HC*DCXB4 and others): the light comes on when the filters need cleaning; press it once to reset after cleaning.
Something looks wrong with the HC60PCIEX3 match? . Reports go to a person, not a bot.