FitMatch

The Fisher & Paykel HF60CIW1 takes the Fisher & Paykel aluminium filter (288 x 362.5 mm) R103793 as its grease filter; Australian sellers list it from A$49.95 as of 5 November 2026. Fitment confirmed against the manufacturer's compatibility list.

Fisher & Paykel HF60CIW1

Your rangehood

Rangehood

Confirmed against Fisher & Paykel's list

R103793

Takes the R103793

Grease filter · check the code on your old filter.

Other Fisher & Paykel rangehoods that take the R103793

Genuine

$49.95

Fisher & Paykel Australia · 5 Nov

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Fisher & Paykel. Compatible: another brand.

Lowest price · $49.95

Fisher & Paykel Australia. Every seller we track is listed below. Some links earn us a commission.

Open Fisher & Paykel Australia

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $49.95

Opens Fisher & Paykel Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it only if it is damaged; clean it at least once a month in hot soapy water or the dishwasher.

After replacing: Hoods with a filter cleaning light (HC*DCXB4 and others): the light comes on when the filters need cleaning; press it once to reset after cleaning.

How to change the grease filter in your Fisher & Paykel HF60CIW1

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Turn the rangehood off. Integrated (HP) models: open the perimeter plate first.
  2. 2Pull the catch and tilt the filter down until it is vertical, then lift it to unhook it from the supports.
  3. 3Wash it in hot soapy water or in the dishwasher; let it dry.
  4. 4Hook the filter into the slots at the rear and lift it until the clips engage (HP models: push it back into place and close the plate). If it is damaged, fit a new one.
  5. 5If the filter cleaning light is on, press it once to reset.
Every number this part goes by
Retail name:
R103793

Sellers list any of these; they are the same part.

About your HF60CIW1

Fisher & Paykel rangehood. Its grease filter is the aluminium filter (288 x 362.5 mm) R103793, part R103793.

Where the model number is: Take out a grease filter: the rating plate with the model number is on the inside wall of the hood or on the fan housing. It is also in the manual and on the receipt.

Fits these 8 Fisher & Paykel models
Common questions
Which grease filter fits the Fisher & Paykel HF60CIW1?
The Fisher & Paykel HF60CIW1 takes the Fisher & Paykel aluminium filter (288 x 362.5 mm) R103793.
Where can I buy the R103793 in Australia?
We track 1 Australian seller for the R103793; the lowest listed price when we last checked was A$49.95 at Fisher & Paykel Australia. Prices are re-checked daily and dated on this page.
How do I fit the R103793 in a Fisher & Paykel HF60CIW1?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Grease builds up in the mesh and the fan pulls less air, so smoke and smells linger; a recirculating hood with a spent carbon filter blows the smell back into the kitchen.
How do I reset the filter light?
Hoods with a filter cleaning light (HC*DCXB4 and others): the light comes on when the filters need cleaning; press it once to reset after cleaning.

Something looks wrong with the HF60CIW1 match? . Reports go to a person, not a bot.