FitMatch

The Fisher & Paykel HP90IDCHX3 takes the Fisher & Paykel metallic filter GTCL 90 792943 as its grease filter; Australian sellers list it from A$160.95 as of 5 November 2026. Fitment confirmed against the manufacturer's compatibility list.

Fisher & Paykel HP90IDCHX3

Your rangehood

Rangehood

Confirmed against Fisher & Paykel's list

Not yours? Change
792943

Takes the 792943

Grease filter · check the code on your old filter.

Other Fisher & Paykel rangehoods that take the 792943

Genuine

$160.95

Fisher & Paykel Australia · 5 Nov

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Fisher & Paykel. Compatible: another brand.

Lowest price · $160.95

Fisher & Paykel Australia. Every seller we track is listed below. Some links earn us a commission.

Open Fisher & Paykel Australia

This rangehood also takes a carbon filter

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Fisher & Paykel AustraliaGenuine · checked 5 Nov$160.95Open
Open cheapest seller · $160.95

Opens Fisher & Paykel Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it only if it is damaged; clean it at least once a month in hot soapy water or the dishwasher.

After replacing: Hoods with a filter cleaning light (HC*DCXB4 and others): the light comes on when the filters need cleaning; press it once to reset after cleaning.

How to change the grease filter in your Fisher & Paykel HP90IDCHX3

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Turn the rangehood off. Integrated (HP) models: open the perimeter plate first.
  2. 2Pull the catch and tilt the filter down until it is vertical, then lift it to unhook it from the supports.
  3. 3Wash it in hot soapy water or in the dishwasher; let it dry.
  4. 4Hook the filter into the slots at the rear and lift it until the clips engage (HP models: push it back into place and close the plate). If it is damaged, fit a new one.
  5. 5If the filter cleaning light is on, press it once to reset.
Every number this part goes by
Retail name:
792943

Sellers list any of these; they are the same part.

About your HP90IDCHX3

Fisher & Paykel rangehood. Its grease filter is the metallic filter GTCL 90 792943, part 792943.

Also in this rangehood: Fisher & Paykel charcoal filter pair 792481 (every 3 months).

Where the model number is: Take out a grease filter: the rating plate with the model number is on the inside wall of the hood or on the fan housing. It is also in the manual and on the receipt.

Fits these 4 Fisher & Paykel models

HP90IDCHEX4, HP90IDCHX4. This rangehood takes 2 of these filters.

Common questions
Which grease filter fits the Fisher & Paykel HP90IDCHX3?
The Fisher & Paykel HP90IDCHX3 takes the Fisher & Paykel metallic filter GTCL 90 792943.
Where can I buy the 792943 in Australia?
We track 1 Australian seller for the 792943; the lowest listed price when we last checked was A$160.95 at Fisher & Paykel Australia. Prices are re-checked daily and dated on this page.
How do I fit the 792943 in a Fisher & Paykel HP90IDCHX3?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Grease builds up in the mesh and the fan pulls less air, so smoke and smells linger; a recirculating hood with a spent carbon filter blows the smell back into the kitchen.
How do I reset the filter light?
Hoods with a filter cleaning light (HC*DCXB4 and others): the light comes on when the filters need cleaning; press it once to reset after cleaning.

Something looks wrong with the HP90IDCHX3 match? . Reports go to a person, not a bot.