FitMatch

The Westinghouse WRC924DSD takes the 5-layer aluminium mesh grease filter (140246376028) as its grease filter; Australian sellers list it from A$45.99 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Westinghouse WRC924DSD

Your rangehood

Rangehood

Confirmed against Westinghouse's list

Not yours? Change

Takes the 140246376028

Grease filter · check the code on your old filter.

This rangehood takes 3 of these filters.

Other Westinghouse rangehoods that take the 140246376028

Genuine

$45.99

Westinghouse Australia · 26 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Westinghouse. Compatible: another brand.

Lowest price · $45.99

Westinghouse Australia. Every seller we track is listed below. Some links earn us a commission.

Open Westinghouse Australia

This rangehood also takes a carbon filter

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

Westinghouse AustraliaGenuine · checked 26 Oct$45.99Open
Electrolux AustraliaGenuine · checked 26 Oct$45.99Open
Open cheapest seller · $45.99

Opens Westinghouse Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is damaged, or every 1–2 years as the maker's care guide suggests; clean it at least once a month with a sponge and non-abrasive detergent, or in the dishwasher.

After replacing: WRC614SD / WRC914SD: when the filter light shows, hold Fan Speed 3 for 2 seconds to reset the grease filter reminder (manual).

How to change the grease filter in your Westinghouse WRC924DSD

Watch the guide or follow the steps.

Westinghouse Rangehoods - How to Clean and Change your Rangehood Filters · Westinghouse Appliances Australia (official)
  1. 1Switch the rangehood off at the wall and let it cool.
  2. 2Press the handle of the mounting clip on the filter, tilt the front of the filter down and pull it out. Repeat for each filter.
  3. 3Wash with a sponge and non-abrasive detergent, or in the dishwasher on a low-temperature, short cycle. Some discolouring is normal.
  4. 4Refit by reversing the steps: back edge in first, then push the clip end up until it holds.
Every number this part goes by
Retail name:
140246376028

Sellers list any of these; they are the same part.

About your WRC924DSD

Westinghouse rangehood — Canopy. Its grease filter is the 5-layer aluminium mesh grease filter (140246376028), part 140246376028.

Also in this rangehood: Carbon filter 240 x 193 x 10 mm, type 5x4a (33005521) (every 4 months).

Where the model number is: Take out a grease filter: the rating plate with the model number is on the inside wall of the hood or on the fan housing. It is also in the manual and on the receipt.

Fits these 4 Westinghouse models

WRC614SD. This rangehood takes 2 of these filters.

The other 3 models. This rangehood takes 3 of these filters.

Common questions
Which grease filter fits the Westinghouse WRC924DSD?
The Westinghouse WRC924DSD takes the 5-layer aluminium mesh grease filter (140246376028). This rangehood takes 3 of these filters.
Where can I buy the 140246376028 in Australia?
We track 2 Australian sellers for the 140246376028; the lowest listed price when we last checked was A$45.99 at Westinghouse Australia. Prices are re-checked daily and dated on this page.
How do I fit the 140246376028 in a Westinghouse WRC924DSD?
No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Grease builds up in the mesh and the fan pulls less air, so smoke and smells linger; a recirculating hood with a spent carbon filter blows the smell back into the kitchen.
How do I reset the filter light?
WRC614SD / WRC914SD: when the filter light shows, hold Fan Speed 3 for 2 seconds to reset the grease filter reminder (manual).

Something looks wrong with the WRC924DSD match? . Reports go to a person, not a bot.