FitMatch
Husqvarna Automower Endurance Blades 595 08 44-01 (6 blades)

Robot mower blade

Husqvarna Automower Endurance Blades 595 08 44-01 (6 blades)

595 08 44-01

Fits 27 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$6.89 each

6-pack $41.32

Amazon AU · 27 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Husqvarna. Compatible: another brand.

Lowest price · $6.89 each · 6-pack $41.32

Amazon AU. Every seller we track is listed below. Some links earn us a commission.

Open Amazon AU

Compare 3 sellers

AUD, before delivery. Each price shows when it was checked.

Amazon AUGenuine · checked 27 Oct$6.89 each6-pack $41.32Open
eBay AUGenuine · checked 27 Oct$6.99 each6-pack $41.95Open
Husqvarna AustraliaGenuine · checked 7 Nov$7.50 each6-pack $45.00Open
Open cheapest seller · $6.89 each · 6-pack $41.32

Opens Amazon AU in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it every 3 to 6 weeks in good conditions, Husqvarna says (2 to 5 weeks on the 520 and 550 EPOS, 4 to 7 weeks on the 105); check the blades weekly while the mower is new, and replace all blades and screws together.

After replacing: No reset needed. Husqvarna says to replace the screws every time you replace the blades.

How to change the 595 08 44-01 robot mower blade

Watch the guide or follow the steps.

How to replace the cutting blades on a Husqvarna Automower® · Husqvarna Australia (official)
  1. 1Push STOP and switch the mower off: set the main switch to 0 if your Automower has one (the 310, 315 and other older models); otherwise hold the ON/OFF button for 3 seconds until the indicator lamp goes out. Put on protective gloves.
  2. 2Turn the mower upside down onto a soft, clean surface so the body does not get scratched.
  3. 3Turn the skid plate until its holes line up with the blade screws.
  4. 4Undo the screws with a screwdriver and remove the blades (3 on most models; 5 on the 500-series EPOS and 535 AWD models).
  5. 5Fit new Husqvarna blades with the new screws. Replace all blades and screws at the same time: used screws wear and can let a blade come loose.
  6. 6Check that every blade pivots freely.
Every number this part goes by
Retail name:
595 08 44-01
Retail name:
595 08 44-02
Retail name:
595 08 44-03

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 27 Husqvarna models

Automower 305E NERA, Automower 310E NERA, Automower 405XE NERA, Automower 410XE NERA. Main blade disc plus an EdgeCut blade disc. Husqvarna gives a usual blade life of 3–6 weeks on the main disc and 9–12 weeks on the EdgeCut disc.

Automower 105, Automower 305, Automower 310, Automower 310 Mark II, Automower 315, Automower 315X, Automower 320 NERA, Automower 405X, Automower 430X NERA, Automower 450X, Automower 450X NERA. Takes 3 blades and 3 screws; replace all three at once.

Common questions
What does the 595 08 44-01 fit?
The Husqvarna Automower Endurance Blades 595 08 44-01 (6 blades) fits 27 Husqvarna models, including the Automower 105, Automower 265 ACX and Automower 305. Every one is listed on this page.
Where can I buy the 595 08 44-01 in Australia?
We track 3 Australian sellers for the 595 08 44-01; the lowest listed price when we last checked was A$6.89 at Amazon AU. Prices are re-checked daily and dated on this page.
How do I fit the 595 08 44-01?
6 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Blunt blades tear the grass tips, which then brown, and the mower works harder on every run.
Is there anything to reset afterwards?
No reset needed. Husqvarna says to replace the screws every time you replace the blades.

Something looks wrong with the 595 08 44-01 match? . Reports go to a person, not a bot.