What happens if I don't change the blade?

Blunt blades tear the grass tips, which then brown, and the mower works harder on every run.

Husqvarna robot mower blades

Which replacement blades each of the 40 Husqvarna robot mowers sold in Australia takes, with dated prices from 4 Australian sellers.

Most take the 595 08 44-01 (27 of 40 models), from $6.89. Check yours below.

Showing 21 of 40 Husqvarna models · grouped by part

Loading more models…

Steps for the Automower Classic Blades 577 86 46-03 (9 blades) (577 86 46-03), the blade 30 Husqvarna models take.

1Push STOP and switch the mower off: set the main switch to 0 if your Automower has one (the 310, 315 and other older models); otherwise hold the ON/OFF button for 3 seconds until the indicator lamp goes out. Put on protective gloves.
2Turn the mower upside down onto a soft, clean surface so the body does not get scratched.
3Turn the skid plate until its holes line up with the blade screws.
4Undo the screws with a screwdriver and remove the blades (3 on most models; 5 on the 500-series EPOS and 535 AWD models).
5Fit new Husqvarna blades with the new screws. Replace all blades and screws at the same time: used screws wear and can let a blade come loose.
6Check that every blade pivots freely.

No reset needed. Husqvarna says to replace the screws every time you replace the blades.

What happens if I don't change the blade?: Blunt blades tear the grass tips, which then brown, and the mower works harder on every run.
Is there anything to reset after changing the blades on a Husqvarna robot mower?: No reset needed. Husqvarna says to replace the screws every time you replace the blades.

All 40 Husqvarna robot mowers we list, A to Z

Brand names describe compatibility only; FitMatch is independent of Husqvarna. Fitment sources are recorded on every model page.