FitMatch
Husqvarna Automower Endurance HSS Blades 599 80 52-01 (6 blades)

Robot mower blade

Husqvarna Automower Endurance HSS Blades 599 80 52-01 (6 blades)

599 80 52-01

Fits 27 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$8.16 each

6-pack $48.95

eBay AU · 27 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Husqvarna. Compatible: another brand.

Lowest price · $8.16 each · 6-pack $48.95

eBay AU. Every seller we track is listed below. Some links earn us a commission.

Open eBay AU

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

eBay AUGenuine · checked 27 Oct$8.16 each6-pack $48.95Open
Husqvarna AustraliaGenuine · checked 30 Oct$9.17 each6-pack $55.00Open
Open cheapest seller · $8.16 each · 6-pack $48.95

Opens eBay AU in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it every 3 to 6 weeks in good conditions, Husqvarna says (2 to 5 weeks on the 520 and 550 EPOS, 4 to 7 weeks on the 105); check the blades weekly while the mower is new, and replace all blades and screws together.

After replacing: No reset needed. Husqvarna says to replace the screws every time you replace the blades.

How to change the 599 80 52-01 robot mower blade

Watch the guide or follow the steps.

How to replace the cutting blades on a Husqvarna Automower® · Husqvarna Australia (official)
  1. 1Push STOP and switch the mower off: set the main switch to 0 if your Automower has one (the 310, 315 and other older models); otherwise hold the ON/OFF button for 3 seconds until the indicator lamp goes out. Put on protective gloves.
  2. 2Turn the mower upside down onto a soft, clean surface so the body does not get scratched.
  3. 3Turn the skid plate until its holes line up with the blade screws.
  4. 4Undo the screws with a screwdriver and remove the blades (3 on most models; 5 on the 500-series EPOS and 535 AWD models).
  5. 5Fit new Husqvarna blades with the new screws. Replace all blades and screws at the same time: used screws wear and can let a blade come loose.
  6. 6Check that every blade pivots freely.
Every number this part goes by
Retail name:
599 80 52-01
Retail name:
599 80 52-02
Retail name:
599 80 52-03

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 27 Husqvarna models

Automower 415X, Automower 430X, Automower 435X AWD. Takes 3 blades and 3 screws; replace all three at once.

Automower 520 EPOS, Automower 535 AWD, Automower 540 EPOS, Automower 550 EPOS, Automower 560 EPOS, Automower 580 EPOS, Automower 580L EPOS. Takes 5 blades and 5 screws; replace all five at once.

The other 17 models. Husqvarna also lists these blades for this model.

Common questions
What does the 599 80 52-01 fit?
The Husqvarna Automower Endurance HSS Blades 599 80 52-01 (6 blades) fits 27 Husqvarna models, including the Automower 415X, Automower 430X and Automower 435X AWD. Every one is listed on this page.
Where can I buy the 599 80 52-01 in Australia?
We track 2 Australian sellers for the 599 80 52-01; the lowest listed price when we last checked was A$8.16 at eBay AU. Prices are re-checked daily and dated on this page.
How do I fit the 599 80 52-01?
6 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Blunt blades tear the grass tips, which then brown, and the mower works harder on every run.
Is there anything to reset afterwards?
No reset needed. Husqvarna says to replace the screws every time you replace the blades.

Something looks wrong with the 599 80 52-01 match? . Reports go to a person, not a bot.