The ECOVACS GOAT A2000 LiDAR PRO takes the ECOVACS Blade Kit for GOAT (12 blades and screws) (part MBK120001) as its blade; Australian sellers list it from A$2.42 each as of 30 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your robot mower
ECOVACS GOAT A2000 LiDAR PRO
Robot mower
Confirmed against ECOVACS's listConfirmed against ECOVACS's own compatibility list
Not yours? Change
Takes the MBK120001 blade
Blade Kit for GOAT (12 blades and screws) · check the code on your old part before ordering.
Your robot mower
Robot mower
Confirmed against ECOVACS's listConfirmed against ECOVACS's own compatibility list
Takes the MBK120001
Blade · check the code on your old part.
Other ECOVACS robot mowers that take the MBK120001
GenuineGenuine ECOVACS
$2.42 each
12-pack $29.00
The Good Guys · 30 OctLowest genuine · The Good Guys · checked 30 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by ECOVACS. Compatible: another brand.Genuine is made by ECOVACS. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $2.42 each · 12-pack $29.00
The Good Guys. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Opens The Good Guys in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it every 4 to 8 weeks depending on the model, ECOVACS says.
How to change the blade in your ECOVACS GOAT A2000 LiDAR PRO
Watch the guide or follow the steps.
- 1Power off the GOAT and put on protective gloves.
- 2On LiDAR models fit the LiDAR cover first, then gently turn the mower over onto a soft surface.
- 3Loosen the screws with a screwdriver and remove the screws and blades.
- 4Fit new ECOVACS blades with new screws and tighten them.
- 5Make sure the blades can spin freely.
Every number this part goes by
- Retail name:
- 201-2201-0000
- Retail name:
- 270-MBK120001
- Retail name:
- GOAT-G1-BLADE-KIT
- Retail name:
- MBK120001
Sellers list any of these; they are the same part.
About your ECOVACS GOAT A2000 LiDAR PRO
ECOVACS robot mower — GOAT A Series. Its blade is the Blade Kit for GOAT (12 blades and screws), part MBK120001.
Where the model number is: The model is on the rating label underneath the mower or under its top cover; it reads like Automower 315X or WR139E. Switch the mower off before you lift it: the blades are sharp.
Fits these 3 ECOVACS models
ECOVACS3 models
Common questions
- Which blade fits the ECOVACS GOAT A2000 LiDAR PRO?
- The ECOVACS GOAT A2000 LiDAR PRO takes the ECOVACS Blade Kit for GOAT (12 blades and screws) (part MBK120001).
- Where can I buy the MBK120001 in Australia?
- We track 2 Australian sellers for the MBK120001; the lowest listed price when we last checked was A$2.42 at The Good Guys. Prices are re-checked daily and dated on this page.
- How do I fit the MBK120001 in an ECOVACS GOAT A2000 LiDAR PRO?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Blunt blades tear the grass tips, which then brown, and the mower works harder on every run.
Something looks wrong with the GOAT A2000 LiDAR PRO match? . Reports go to a person, not a bot.