The Segway Navimow H800A-VF takes the Segway Navimow Blade Assembly Plus X3A06E (12 blades) as its blade; replace it every month; Australian sellers list it from A$2.42 each as of 27 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your robot mower
Segway Navimow H800A-VF
Robot mower
Confirmed against Segway Navimow's listConfirmed against Segway Navimow's own compatibility list
Not yours? ChangeSave it · remind me every month
Takes the X3A06E blade
Blade Assembly Plus X3A06E (12 blades) · replace every month · check the code on your old part before ordering.
Your robot mower
Robot mower
Confirmed against Segway Navimow's listConfirmed against Segway Navimow's own compatibility list
Takes the X3A06E
Blade · every month · check the code on your old part.
Other Segway Navimow robot mowers that take the X3A06E
GenuineGenuine Segway Navimow
$2.42 each
12-pack $29.00
Navimow Australia · 27 OctLowest genuine · Navimow Australia · checked 27 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Segway Navimow. Compatible: another brand.Genuine is made by Segway Navimow. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $2.42 each · 12-pack $29.00
Navimow Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Opens Navimow Australia in a new tab. Their page is the source of truth for price, delivery and returns.
Not due yet?
Get a nudge when your blade is due — it's every month. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the blade in your Segway Navimow H800A-VF
Watch the guide or follow the steps.
- 1Power off the mower and put on protective gloves.
- 2Place the mower upside down on a flat, clean surface.
- 3Loosen the screws with a cross-tip (Phillips) screwdriver and remove the old screws and blades. Do not use an electric screwdriver.
- 4Fit the new blades with the new screws (Navimow gives 1 N·m). Never reuse old screws.
- 5Check that each blade spins freely. They will still feel loose; that is normal because they swing out when mowing.
Every number this part goes by
- Retail name:
- AD.12.00.14.0057
- Retail name:
- AD.12.00.14.0058
- Retail name:
- SNPAD1200140058
- Retail name:
- X3A06
- Retail name:
- X3A06E
Sellers list any of these; they are the same part.
About your Segway Navimow H800A-VF
Segway Navimow robot mower — Navimow H Series. Its blade is the Blade Assembly Plus X3A06E (12 blades), part X3A06E, changed every month.
Where the model number is: The model is on the rating label underneath the mower or under its top cover; it reads like Automower 315X or WR139E. Switch the mower off before you lift it: the blades are sharp.
Fits these 16 Segway Navimow models
Common questions
- Which blade fits the Segway Navimow H800A-VF?
- The Segway Navimow H800A-VF takes the Segway Navimow Blade Assembly Plus X3A06E (12 blades).
- How often should I replace the blade in my Segway Navimow H800A-VF?
- Every month, or sooner if it looks worn.
- Where can I buy the X3A06E in Australia?
- We track 2 Australian sellers for the X3A06E; the lowest listed price when we last checked was A$2.42 at Navimow Australia. Prices are re-checked daily and dated on this page.
- How do I fit the X3A06E in a Segway Navimow H800A-VF?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Blunt blades tear the grass tips, which then brown, and the mower works harder on every run.
Something looks wrong with the H800A-VF match? . Reports go to a person, not a bot.