Vacuum cleaner filter
Milwaukee HEPA filter 49901900A for M18WDV, M18FPOVCL and M12FWDVL
49901900A
Fits 3 models
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Milwaukee
$48.95
Sydney Tools · 28 OctLowest genuine · Sydney Tools · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Milwaukee. Compatible: another brand.Genuine is made by Milwaukee. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $48.95
Sydney Tools. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Sydney Tools in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is damaged or suction stays low after cleaning, Milwaukee says; tap it clean or rinse it, and let it dry for 24 hours after washing.
After replacing: No reset.
How to change the 49901900A filter
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Take the battery pack out, then close and latch the battery compartment.
- 2Release the tank latches and lift off the motor housing.
- 3Turn the filter anticlockwise and pull it off the motor housing and float cage. Empty the debris from the tank.
- 4Slide the new filter over the float cage, line its tabs up with the notches in the motor housing and turn it clockwise to lock.
- 5Put the motor housing back on the tank and close both latches.
Every number this part goes by
- Retail name:
- 49901900
- Retail name:
- 49901900A
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits these 3 Milwaukee models
Milwaukee3 models
Common questions
- What does the 49901900A fit?
- The Milwaukee HEPA filter 49901900A for M18WDV, M18FPOVCL and M12FWDVL fits the Milwaukee M12FWDVL-0, M18FPOVCL-0 and M18WDV-0.
- Where can I buy the 49901900A in Australia?
- We track 1 Australian seller for the 49901900A; the lowest listed price when we last checked was A$48.95 at Sydney Tools. Prices are re-checked daily and dated on this page.
- How do I fit the 49901900A?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Suction drops and the vacuum may cut out on a blocked filter.
- Is there anything to reset afterwards?
- No reset.
Something looks wrong with the 49901900A match? . Reports go to a person, not a bot.