FitMatch

The Milwaukee M12FWDVL-0 takes the Milwaukee HEPA filter 49901900A for M18WDV, M18FPOVCL and M12FWDVL as its filter; Australian sellers list it from A$48.95 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Milwaukee M12FWDVL-0

Your vacuum cleaner

Wet and dry vacuum

Confirmed against Milwaukee's list

Not yours? Change
49901900A

Takes the 49901900A

Filter · check the code on your old filter.

Other Milwaukee vacuum cleaners that take the 49901900A

Genuine

$48.95

Sydney Tools · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Milwaukee. Compatible: another brand.

Lowest price · $48.95

Sydney Tools. Every seller we track is listed below. Some links earn us a commission.

Open Sydney Tools

This vacuum cleaner also takes a dust bag

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Sydney ToolsGenuine · checked 28 Oct$48.95Open
Open cheapest seller · $48.95

Opens Sydney Tools in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is damaged or suction stays low after cleaning, Milwaukee says; tap it clean or rinse it, and let it dry for 24 hours after washing.

After replacing: No reset.

How to change the filter in your Milwaukee M12FWDVL-0

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Take the battery pack out, then close and latch the battery compartment.
  2. 2Release the tank latches and lift off the motor housing.
  3. 3Turn the filter anticlockwise and pull it off the motor housing and float cage. Empty the debris from the tank.
  4. 4Slide the new filter over the float cage, line its tabs up with the notches in the motor housing and turn it clockwise to lock.
  5. 5Put the motor housing back on the tank and close both latches.
Every number this part goes by
Retail name:
49901900
Retail name:
49901900A

Sellers list any of these; they are the same part.

About your M12FWDVL-0

Milwaukee vacuum cleaner, wet and dry vacuum — M12 FUEL wet/dry vacuum L Class. Its filter is the HEPA filter 49901900A for M18WDV, M18FPOVCL and M12FWDVL, part 49901900A.

Other filters the maker lists for this vacuum cleaner: Milwaukee foam wet filter 49902015 for M18WDV, M18FPOVCL and M12FWDVL. Foam wet filter: use it instead of the HEPA filter when you vacuum liquids, Milwaukee says; it is sold separately.

Also in this vacuum cleaner: Milwaukee fleece dust bags 4932478762 for M12FWDVL and M18FPOVCL (3 pack).

Where the model number is: The rating label is on the underside or the back of the main body; the old part usually has its own code printed on it.

Fits these 3 Milwaukee models
Common questions
Which filter fits the Milwaukee M12FWDVL-0?
The Milwaukee M12FWDVL-0 takes the Milwaukee HEPA filter 49901900A for M18WDV, M18FPOVCL and M12FWDVL.
Where can I buy the 49901900A in Australia?
We track 1 Australian seller for the 49901900A; the lowest listed price when we last checked was A$48.95 at Sydney Tools. Prices are re-checked daily and dated on this page.
How do I fit the 49901900A in a Milwaukee M12FWDVL-0?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Suction drops and the vacuum may cut out on a blocked filter.
Is there anything to reset afterwards?
No reset.

Something looks wrong with the M12FWDVL-0 match? . Reports go to a person, not a bot.