How do I fit the 8.08.0056?

No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.

What happens if I don't change it?

A worn or matted roller picks up less; on a floor cleaner it also leaves streaks and water behind.

Hard floor cleaner roller

Roborock wet and dry roller for F25 Ultra, F25, F25 RT, F25 ACE and F25 ACE Pro

8.08.0056

Fits 7 models · replace every 3 months

Wrong part, or your model missing? Tell us. A person checks every report.

GenuineGenuine Roborock

$49.90

Roborock Australia · 3 NovLowest genuine · Roborock Australia · checked 3 Nov

CompatibleCompatible option

See seller

No compatible seller tracked yetNo compatible seller tracked yet

Genuine: made by Roborock. Compatible: another brand.Genuine is made by Roborock. Compatible is made by another brand. Check the seller's page for the size and models it fits.

Lowest price · $49.90

Roborock Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.

Open Roborock Australia · $49.90

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Genuine Roborock

1 seller

Roborock AustraliaGenuine · checked 3 NovGenuine part · Lowest genuinechecked 3 Nov$49.90OpenGo to seller

Open cheapest seller · $49.90

Opens Roborock Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Usually every 3 months (every 3 months, Roborock says in its F25 manuals).

After replacing: No reset: the maker's manual describes no replacement reminder for this part.

Not due yet?

Get a nudge when your roller is due — it's every 3 months. One email two weeks before, no newsletter. Manage or stop it anytime.

How to change the 8.08.0056 roller

Watch the guide or follow the steps.

Roborock F25 Ultra Routine Maintenance · Roborock Support (official)

1Take the F25 off its charging dock and switch it off.
2Grip the clean tank handle, press the release button and lift the clean tank off at a slight angle.
3Grab the roller release tab and pull the roller out along the cleaner head.
4Pull the roller cap off the old roller by grabbing the whole cap (not its handle) and fit the cap onto the new roller.
5Slide the new roller back in and refit the clean tank.

Every number this part goes by8.08.0056 · 8080056

Retail name:: 8.08.0056
Retail name:: 8080056

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Your appliance model

Fits these 7 Roborock modelsF25, F25 ACE, F25 ACE Combo, F25 ACE Pro, F25 Combo …

Roborock7 models

Roborock Australia also sells the F25 roller under part number 8.08.0056 for this model.

Common questionsWhat does the 8.08.0056 fit? · How often should I replace the 8.08.0056? · Where can I buy the 8.08.0056 in Australia?

What does the 8.08.0056 fit?: The Roborock wet and dry roller for F25 Ultra, F25, F25 RT, F25 ACE and F25 ACE Pro (part 8.08.0056) fits 7 Roborock models, including the F25, F25 ACE and F25 ACE Combo. Every one is listed on this page.
How often should I replace the 8.08.0056?: Every 3 months, or sooner if it looks worn.
Where can I buy the 8.08.0056 in Australia?: We track 1 Australian seller for the 8.08.0056; the lowest listed price when we last checked was A$49.90 at Roborock Australia. Prices are re-checked daily and dated on this page.
How do I fit the 8.08.0056?: No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?: A worn or matted roller picks up less; on a floor cleaner it also leaves streaks and water behind.
Is there anything to reset afterwards?: No reset: the maker's manual describes no replacement reminder for this part.

Something looks wrong with the 8.08.0056 match? . Reports go to a person, not a bot.