The Roborock F25 ACE Pro takes the Roborock wet and dry filter for F25, F25 ACE, F25 RT, F25 Ultra and F25 ACE Pro (2 pack) (part 8.08.0038) as its filter; Australian sellers list it from A$3.20 each as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your hard floor cleaner
Roborock F25 ACE Pro
Hard floor cleaner
Confirmed against Roborock's listConfirmed against Roborock's own compatibility list
Not yours? Change
Takes the 8.08.0038 filter
wet and dry filter for F25, F25 ACE, F25 RT, F25 Ultra and F25 ACE Pro (2 pack) · check the code printed on your old filter before ordering.
Your hard floor cleaner
Hard floor cleaner
Confirmed against Roborock's listConfirmed against Roborock's own compatibility list
Takes the 8.08.0038
Filter · check the code on your old filter.
Other Roborock hard floor cleaners that take the 8.08.0038
GenuineGenuine Roborock
$19.95 each
2-pack $39.90
Roborock Australia · 3 NovLowest genuine · Roborock Australia · checked 3 Nov
CompatibleCompatible option
$3.20 each
5-pack $15.99
Amazon AU · 28 OctAmazon AU · checked 28 Oct
Check sellerCheck seller details
Genuine: made by Roborock. Compatible: another brand.Genuine is made by Roborock. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $3.20 each · 5-pack $15.99
Amazon AU. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Other parts this hard floor cleaner takes
- Roborock wet and dry roller for F25, F25 ACE, F25 ACE Pro, F25 RT and F25 UltraOpen Amazon AU$21.63
The roller. Separate from the filter. Replace every 3 months.
Compare 3 sellers - Roborock wet and dry roller for F25, F25 ACE and F25 RTOpen Roborock Australia$49.90
The roller. Roborock Australia also sells the F25 roller under part number 8.08.0040 for this model. Separate from the filter. Replace every 3 months.
- Roborock wet and dry roller for F25 Ultra, F25, F25 RT, F25 ACE and F25 ACE ProOpen Roborock Australia$49.90
The roller. Roborock Australia also sells the F25 roller under part number 8.08.0056 for this model. Separate from the filter. Replace every 3 months.
- Roborock Floor Cleaner 480 ml (green) for F25 ACE ProOpen Roborock Australia$39.90
The cleaning solution. Refill when the cartridge runs low: it goes straight into the F25 ACE Pro's solution cartridge without diluting.
Compare 4 listings from 3 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
2 sellers
Opens Amazon AU in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it as needed: Roborock gives no fixed interval for the F25 filter; rinse it in cold water when dirty and let it dry fully.
After replacing: No reset: the maker's manual describes no replacement reminder for this part.
How to change the filter in your Roborock F25 ACE Pro
Watch the guide or follow the steps.
- 1Take the vacuum off its charging dock and switch it off.
- 2Take out the dirty water tank and pull out its cover.
- 3Take the filter off the tank cover.
- 4Fit the new filter, refit the cover and put the tank back. Roborock says to let a washed filter dry for up to 24 hours, so keep a second one to swap in.
Every number this part goes by
- Retail name:
- 8.08.0038
- Retail name:
- 8080038
Sellers list any of these; they are the same part.
About your Roborock F25 ACE Pro
Roborock vacuum cleaner, hard floor cleaner — F25. Its filter is the wet and dry filter for F25, F25 ACE, F25 RT, F25 Ultra and F25 ACE Pro (2 pack), part 8.08.0038.
Also in this hard floor cleaner:
- Roborock wet and dry roller for F25, F25 ACE, F25 ACE Pro, F25 RT and F25 Ultra (every 3 months), Roborock Floor Cleaner 480 ml (green) for F25 ACE Pro.
- Roborock wet and dry roller for F25, F25 ACE and F25 RT (every 3 months). Roborock Australia also sells the F25 roller under part number 8.08.0040 for this model.
- Roborock wet and dry roller for F25 Ultra, F25, F25 RT, F25 ACE and F25 ACE Pro (every 3 months). Roborock Australia also sells the F25 roller under part number 8.08.0056 for this model.
Where the model number is: The rating label is on the underside or the back of the main body; the old part usually has its own code printed on it.
Fits these 5 Roborock models
Roborock5 models
Common questions
- Which filter fits the Roborock F25 ACE Pro?
- The Roborock F25 ACE Pro takes the Roborock wet and dry filter for F25, F25 ACE, F25 RT, F25 Ultra and F25 ACE Pro (2 pack) (part 8.08.0038). Compatible filters made to the same specification also fit.
- Where can I buy the 8.08.0038 in Australia?
- We track 3 Australian sellers for the 8.08.0038; the lowest listed price when we last checked was A$3.20 at Amazon AU. Prices are re-checked daily and dated on this page.
- How do I fit the 8.08.0038 in a Roborock F25 ACE Pro?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Suction drops and the vacuum may cut out on a blocked filter.
- Is there anything to reset afterwards?
- No reset: the maker's manual describes no replacement reminder for this part.
Something looks wrong with the F25 ACE Pro match? . Reports go to a person, not a bot.