Shark vacuum cleaner filters and dust bags by part number

Shark's genuine XFF680 for the NV680, NV800, NZ801: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 3 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 3 Shark models: NV680, NV800, NZ801.

Shark's genuine XFFKNV612UKT for the NV602, NV612, NV702: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 3 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 3 Shark models: NV602, NV612, NV702.

Shark's genuine XHFNV702ANZ for the NV602, NV612, NV702: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 3 Shark models: NV602, NV612, NV702.

Shark's genuine 1492CH3611ANZ for the IW1611, IW3611: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: IW1611, IW3611.

Shark's genuine 1493CH3611ANZ for the IW1611, IW3611: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: IW1611, IW3611.

Shark's genuine 617FJ140 for the IZ320, IZ400, IZ420: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: IZ400, IZ420.

Shark's genuine XFFCZ250ANZ for the CZ250, CZ500: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 3 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: CZ250, CZ500.

Shark's genuine XFFH380 for the HV320, HV380, HV382: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: HV320, HV380.

Shark's genuine XFFKIZ300ANZ for the IZ300, IZ320: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: IZ300, IZ320.

Shark's genuine XHF102SM for the IZ102, IZ202: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: IZ102, IZ202.

Shark's genuine XHFCZ250ANZ for the CZ250, CZ500: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: CZ250, CZ500.

Shark's genuine XHFIZ300ANZ for the IZ300, IZ320: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: IZ300, IZ320.

Shark's genuine XHFIZ400EUKT for the IZ400, IZ420: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: IZ400, IZ420.

Shark's genuine XHP620EUUK for the NV800, NZ801: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: NV800, NZ801.

Shark's genuine XPREMF100 for the IF200, IF250: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: IF200, IF250.

Shark's genuine XPRMFIZ140ANZ for the IZ102, IZ202: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: IZ102, IZ202.

Shark's genuine XPSTFH380 for the HV380, HV382, HV320: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: HV320, HV380.

Shark's genuine XPTMF2ANZ for the IF200, IF250: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: IF200, IF250.

Shark's genuine XSKPMF3251ANZ for the IP1251, IP3251: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: IP1251, IP3251.

Shark's genuine XSKPOM3251ANZ for the IP1251, IP3251: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits 2 Shark models: IP1251, IP3251.

Shark's genuine HV300NZFK for the HV300: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the HV300.

Shark's genuine NV350PMFK for the NV350: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 3 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the NV350.

Shark's genuine NV500HF for the NV500: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the NV500.

Shark's genuine XFF500 for the NV500: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 3 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the NV500.

Shark's genuine XFF600 for the NV600: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 3 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the NV600.

Shark's genuine XFF650 for the NV750: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 3 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the NV750.

Shark's genuine XFFKAZ3900UKT for the AZ3900: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 3 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the AZ3900.

Shark's genuine XFFKH500 for the HZ500: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the HZ500.

Shark's genuine XFFKNZ860UKT for the AZ913: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 3 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the AZ913.

Shark's genuine XFFKPZ1000ANZ for the PZ1000: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 3 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the PZ1000.

Shark's genuine XFFKZU62ANZ for the ZU62: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 3 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the ZU62.

Shark's genuine XFMFF390 for the HZ390: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the HZ390.

Shark's genuine XHF350 for the NV350: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the NV350.

Shark's genuine XHF390EU for the HZ390: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the HZ390.

Shark's genuine XHF600 for the NV600: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the NV600.

Shark's genuine XHF650 for the NV750: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the NV750.

Shark's genuine XHFAZ3900UKT for the AZ3900: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the AZ3900.

Shark's genuine XHFNZ860UKT for the AZ913: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the AZ913.

Shark's genuine XHFPZ1000ANZ for the PZ1000: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the PZ1000.

Shark's genuine XHFZU62ANZ for the ZU62: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the ZU62.

Shark's genuine XPRFIW1000 for the BU3521: the foam and felt pre-motor filters that sit above the dust cup. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the BU3521.

Shark's genuine XRFHZ500ANZ for the HZ500: the post-motor filter behind the cover on the main body, the last stage before the exhaust. Shark's part page lists the fit; both filter stages are washable and the part is for when they no longer come clean or are damaged.

Change it every 12 months; 4 steps, no tools.

After the change: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.

Fits the HZ500.