The Shark NV680 takes the Shark Pre-Motor Filter Kit for NV800/NZ801/NV680 (XFF680) as its pre-filter; replace it every 12 months; Australian sellers list it from A$24.00 as of 21 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your vacuum cleaner
Shark NV680
Stick vacuum
Confirmed against Shark's listConfirmed against Shark Australia's compatibility list
Not yours? ChangeSave it · remind me every 12 months
Takes the XFF680 pre-filter
Pre-Motor Filter Kit for NV800/NZ801/NV680 (XFF680) · replace every 12 months · check the code printed on your old filter before ordering.
Your vacuum cleaner
Stick vacuum
Confirmed against Shark's listConfirmed against Shark Australia's compatibility list
Takes the XFF680
Pre-filter · every 12 months · check the code on your old filter.
Other Shark vacuum cleaners that take the XFF680
GenuineGenuine Shark
$24.00
Shark Au · 21 OctLowest genuine · Shark Au · checked 21 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Shark. Compatible: another brand. Check certification on the seller's page.Genuine is made by Shark. Compatible is made by another brand. Check the seller's certification details before choosing.
Lowest price · $24.00
Shark Au. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Shark Au in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Usually every 12 months.
After replacing: Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.
Flow slows and taste drops off as the filter fills up. Changing on time is the whole point.
Not due yet?
Get a nudge when your filter is due — it's every 12 months. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the pre-filter in your Shark NV680
Watch the guide or follow the steps.
- 1Unplug the vacuum and lift the dust cup off the main body.
- 2Lift the foam and felt filters out of the well under the cup and fit the new felt first, then the foam.
- 3Refit the dust cup until it clicks. Rinse the foam and felt monthly and let them dry 24 hours.
Every number this part goes by
- Retail name:
- XFF680
Sellers list any of these; they are the same part.
About your Shark NV680
Shark vacuum cleaner, stick vacuum — Rotator. Its pre-filter is the Pre-Motor Filter Kit for NV800/NZ801/NV680 (XFF680), part XFF680, changed every 12 months.
Where the model number is: The rating label is on the underside or the back of the main body; the bag or filter type is usually printed on the old part.
Fits these 3 Shark models
Common questions
- Which pre-filter fits the Shark NV680?
- The Shark NV680 takes the Shark Pre-Motor Filter Kit for NV800/NZ801/NV680 (XFF680) (part XFF680). Compatible filters made to the same specification also fit.
- How often should I replace the pre-filter in my Shark NV680?
- Every 12 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
- Where can I buy the XFF680 in Australia?
- We track 1 Australian seller for the XFF680; the lowest listed price when we last checked was A$24.00 at Shark Au. Prices are re-checked daily and dated on this page.
- How do I fit the XFF680 in a Shark NV680?
- No tools, a few minutes: 3 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Suction drops and the vacuum may cut out on a blocked filter, and a full bag loses suction well before it looks full.
- How do I reset the reminder?
- Shark: rinse filters in water only (no soap), squeeze out and air-dry for at least 24 hours before refitting; a damp filter can damage the motor. No reset.
Something looks wrong with the NV680 match? . Reports go to a person, not a bot.