The Bissell CrossWave Edge Cordless 4328F takes the Bissell FreshStart Filter for CrossWave OmniFind and Edge Cordless (part 1640898) as its filter; replace it every 3 months; Australian sellers list it from A$18.95 as of 2 November 2026. Fitment confirmed against the manufacturer's compatibility list.
Your hard floor cleaner
Bissell CrossWave Edge Cordless 4328F
Hard floor cleaner
Confirmed against Bissell's listConfirmed against Bissell's own compatibility list
Not yours? ChangeSave it · remind me every 3 months
Takes the 1640898 filter
FreshStart Filter for CrossWave OmniFind and Edge Cordless · replace every 3 months · check the code printed on your old filter before ordering.
Your hard floor cleaner
Hard floor cleaner
Confirmed against Bissell's listConfirmed against Bissell's own compatibility list
Takes the 1640898
Filter · every 3 months · check the code on your old filter.
Other Bissell hard floor cleaners that take the 1640898
GenuineGenuine Bissell
$18.95
Bissell Australia · 2 NovLowest genuine · Bissell Australia · checked 2 Nov
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Bissell. Compatible: another brand.Genuine is made by Bissell. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $18.95
Bissell Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
This hard floor cleaner also takes a roller
- Bissell ZeroGap Multi-Surface Brush Roll for CrossWave OmniForce Edge, EdgeFind and Edge CordlessOpen Bissell Australia$17.95
Separate from the filter. Replace every 3 months.
Compare 2 sellers
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Bissell Australia in a new tab. Their page is the source of truth for price, delivery and returns.
Not due yet?
Get a nudge when your filter is due — it's every 3 months. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the filter in your Bissell CrossWave Edge Cordless 4328F
Watch the guide or follow the steps.
- 1Turn the machine off and take it off the docking station or tray.
- 2Press the dirty water tank release and pull the tank out by its handle.
- 3Lift off the top of the tank by the recessed areas beside the filter and empty the tank.
- 4Pull the filter out of the top of the dirty water tank by its tabs.
- 5Fit the new filter, refit the tank top, then insert the bottom of the tank first and tilt it in until it clicks.
Every number this part goes by
- Retail name:
- 1640898
Sellers list any of these; they are the same part.
About your Bissell CrossWave Edge Cordless 4328F
Bissell vacuum cleaner, hard floor cleaner — CrossWave Edge. Its filter is the FreshStart Filter for CrossWave OmniFind and Edge Cordless, part 1640898, changed every 3 months.
Other filters the maker lists for this hard floor cleaner: Bissell FreshStart Filter for CrossWave OmniForce Edge, EdgeFind and Edge Cordless (every 3 months). Bissell Australia also lists FreshStart filter 1640066 for this model.
Also in this hard floor cleaner: Bissell ZeroGap Multi-Surface Brush Roll for CrossWave OmniForce Edge, EdgeFind and Edge Cordless (every 3 months).
Where the model number is: The rating label is on the underside or the back of the main body; the old part usually has its own code printed on it.
Fits these 3 Bissell models
Common questions
- Which filter fits the Bissell CrossWave Edge Cordless 4328F?
- The Bissell CrossWave Edge Cordless 4328F takes the Bissell FreshStart Filter for CrossWave OmniFind and Edge Cordless (part 1640898).
- How often should I replace the filter in my Bissell CrossWave Edge Cordless 4328F?
- Every 3 months. It works less well as the filter fills up, so it's worth doing on time.
- Where can I buy the 1640898 in Australia?
- We track 1 Australian seller for the 1640898; the lowest listed price when we last checked was A$18.95 at Bissell Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 1640898 in a Bissell CrossWave Edge Cordless 4328F?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Suction drops and the vacuum may cut out on a blocked filter.
- Is there anything to reset afterwards?
- No reset: the maker's manual describes no replacement reminder for this part.
Something looks wrong with the CrossWave Edge Cordless 4328F match? . Reports go to a person, not a bot.