The Bosch GAS 18V-10 L takes the Bosch Professional flat-pleated filter 2 608 000 663 for GAS 18V-10 L as its filter; Australian sellers list it from A$78.15 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your vacuum cleaner
Bosch GAS 18V-10 L
Wet and dry vacuum
Confirmed against Bosch's listConfirmed against Bosch's own compatibility list
Not yours? Change
Takes the 2 608 000 663 filter
Professional flat-pleated filter 2 608 000 663 for GAS 18V-10 L · check the code printed on your old filter before ordering.
Your vacuum cleaner
Wet and dry vacuum
Confirmed against Bosch's listConfirmed against Bosch's own compatibility list
Takes the 2 608 000 663
Filter · check the code on your old filter.
Other Bosch vacuum cleaners and their filters and dust bags
The 2 608 000 663 fits the GAS 18V-10 L only. These Bosch models take a different filter:
GenuineGenuine Bosch
$78.15
Amazon AU · 28 OctLowest genuine · Amazon AU · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Bosch. Compatible: another brand.Genuine is made by Bosch. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $78.15
Amazon AU. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Amazon AU in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is damaged, Bosch says; until then tap it clean when dry or rinse it under running water and let it dry thoroughly.
After replacing: No reset.
How to change the filter in your Bosch GAS 18V-10 L
Watch the guide or follow the steps.
- 1Take the battery out of the dust extractor.
- 2Open the catches and lift off the dust extractor lid.
- 3Turn the filter as far as it will go and lift it off the filter bracket.
- 4Put the new filter over the filter bracket and turn it as far as it will go.
- 5Refit the lid and close the catches firmly.
Every number this part goes by
- Retail name:
- 2 608 000 663
- Retail name:
- BH2608000663
Sellers list any of these; they are the same part.
About your Bosch GAS 18V-10 L
Bosch vacuum cleaner, wet and dry vacuum — Professional 18V dust extractors. Its filter is the Professional flat-pleated filter 2 608 000 663 for GAS 18V-10 L, part 2 608 000 663.
Where the model number is: The rating label is on the underside or the back of the main body; the old part usually has its own code printed on it.
Fits this Bosch model
Bosch1 model
Common questions
- Which filter fits the Bosch GAS 18V-10 L?
- The Bosch GAS 18V-10 L takes the Bosch Professional flat-pleated filter 2 608 000 663 for GAS 18V-10 L.
- Where can I buy the 2 608 000 663 in Australia?
- We track 1 Australian seller for the 2 608 000 663; the lowest listed price when we last checked was A$78.15 at Amazon AU. Prices are re-checked daily and dated on this page.
- How do I fit the 2 608 000 663 in a Bosch GAS 18V-10 L?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Suction drops and the vacuum may cut out on a blocked filter.
- Is there anything to reset afterwards?
- No reset.
Something looks wrong with the GAS 18V-10 L match? . Reports go to a person, not a bot.